How long have you been running this? Any issues?Quote:
Originally Posted by Boonejeepin
Printable View
How long have you been running this? Any issues?Quote:
Originally Posted by Boonejeepin
So yesterday I got this new tip. It is from a supra and all the dealer had to replace my stock one that I threw away. It has a flapper that I feel is pretty restrictive. I wonder if I should remove it?
Do not remove the flapper. The flapper prevents water backing up into the engine.
Surf pipes don’t have flappers its hard for water/waves to fill a pipe with a high hump in it
Sent from my iPhone using Tapatalk
I have some confusion. Look at Post #3. I think there already is an internal baffle? My Setup was identical before with the exterior flapper, but that seems way less restrictive.Quote:
Originally Posted by larry_arizona
Quote:
Originally Posted by flienlow
The baffle is noise reduction, flapper prevents engine flooding, the surf pipe has a flapper in it unless you ordered it without.
Will the Supra exhaust port tip work better then stock moomba mojo exhaust port? It looks like it deflects the exhaust down into the water versus just straight out of the boat. Also will it work with center surf tab? Would it be a good upgrade for a moomba?
This is the OEM Moomba surf pipe...https://uploads.tapatalk-cdn.com/202...52c3cd60f7.jpghttps://uploads.tapatalk-cdn.com/202...f6654e1bcc.jpgQuote:
Originally Posted by jnr4817
Sent from my Note 9 using Tapatalk
Looks the exact same as the OEM Supra version, plus it has a drain hole in the bottom of the surf pipe where the surf pipe goes into the transom wall.
I noticed the 2020+ Supra surf pipes are much shallower/flatter
https://uploads.tapatalk-cdn.com/202...a648939dae.jpg
Sent from my iPhone using Tapatalk
That's what my new one looks like, doesn't hang down so farQuote:
Originally Posted by larry_arizona