Question on Bimini Part

Hey All,
Does anyone know what the part on the bimini is called that holds the second pole and has a pin that goes through it? It is about an inch or two long and has an opening on the top for the ball at the end of the pole to slide into and then it gets pinned in. And also where I can order it? It's for a 2020 Max. It's stripped out and the post keeps slipping off. I've tried to add a picture but the thread is not letting me. I'll see if I can do so after the initial post. Thanks in advance. Wren

Update: I tried to add a picture in a reply and it's still not letting me. Not sure why but the upload button just isn't working on my end. I added a little more detail on the part. Hopefully the above makes sense.

You can create a Tapatalk account and add photos through this forum on the app. Much easier and the photos are larger than through the forum by itself.

Double thumbs up for Tapatalk!! The free account works well too.

Sent from my SM-G781V using Tapatalk

Got Tapatalk and was able to add some pictures. Thanks for the tip. It was super easy to do.https://uploads.tapatalk-cdn.com/202...a0f62eacc7.jpghttps://uploads.tapatalk-cdn.com/202...932a0dc4c5.jpghttps://uploads.tapatalk-cdn.com/202...2a0d379224.jpg

Sent from my Pixel 6 Pro using Tapatalk

When you say stripped out are you referring to the screws holding it to the main bimini frame? If thats the case you could go up a size on screws or move it fore/aft a bit and redrill the screw holes.

Quote:

---

Originally Posted by Mxmark4

When you say stripped out are you referring to the screws holding it to the main bimini frame? If thats the case you could go up a size on screws or move it fore/aft a bit and redrill the screw holes.

---

It's the actual piece that is "stripped". Sorry my description above was all over the place. Basically the ball at the end of the post eroded away at the portion near the pin and now it won't stay in place. It's hard to see in the picture.https://uploads.tapatalk-cdn.com/202...f67924c380.jpg

Sent from my Pixel 6 Pro using Tapatalk

Look at taco marine. They have several styles that you could use to replace that socket. I just googled bimini top ball socket and got a ton of results

Quote:

---

Originally Posted by Mxmark4

Look at taco marine. They have several styles that you could use to replace that socket. I just googled bimini top ball socket and got a ton of results

---

Cool. Thanks Mark. I'll check it out. Just trying to get some random things taken care of before spring officially rolls in.

Sent from my Pixel 6 Pro using Tapatalk

If I am not mistaken, Roswell makes the bimini. I would just call them directly. That might be the quickest easiest way to get replacement.

Sent from my SM-G975U1 using Tapatalk

So are you saying the ball eroded away from the pin, is it this?https://uploads.tapatalk-cdn.com/202...7da21b876e.jpg

Sent from my SM-G781V using Tapatalk