Printable View
Was surfing today and starboard surf tan stuck down in 85% position, got a “surf tab fault”
Tried.
1)turn boat on/off
2) full battery off reset
3) currently seeing if tabs are on a fuse
Still down.
Any other ideas before I take to dealer in the morning?
Sent from my iPhone using Tapatalk
See if you have any PDM faults, reset that module. Might be the actuator itself, pretty easy fix. Can also try to hit surf left and surf right a few times, Seen that clear it up before as well.Quote:
Originally Posted by larry_arizona
I get a message of a pdm fault, but when I go to the pdm diagnostic screen, I see no red faults.
Tried surf left then surf right.
Still stuck.
I don’t see a fuse for the tabs.
Sent from my iPhone using Tapatalk
The PDM is a resettable circuit breaker. Push the button to test then reset the lever. Even if they don't look tripped, do it anyway. Those should be behind a false wall on the backside of your rear seat or that general area.Quote:
Originally Posted by larry_arizona
PDM’s reset, tab still stuck down.
Taking it to dealer in am, got a recall plus a bad rotor on trailer to replace.
Sent from my iPhone using Tapatalk
Software update/flash at dealer, tab fixed.
Sent from my iPhone using Tapatalk
Good to know!! Now get back out on the lake.Quote:
Originally Posted by larry_arizona
2022 SA 450