Printable View
I have the original tower speakers on my 2015 Moomba Mondo surf edition. The speakers on the right side only play when it is high volume. Any idea what that indicates? My thought is it cannot be a connection, maybe the amplifier. Thoughts?
Sent from my iPhone using Tapatalk
High volume creates the max 3V signal from the Fusion stereo through the RCAs and into the amp.
If you only get sound during high volume, then the voltage at low volume isn't making it to the amp. You could have a loose connection behind the stereo or at the amp. Does your tower speaker amp have 2 different inputs (front and rear)? Try switching from current to the other input if your connections are good.
check head unit's balance setting.
Yep.
Sent from my iPhone using Tapatalk
Yes. I did. Thanks.Quote:
Originally Posted by MLA
Sent from my iPhone using Tapatalk
Are the SSTBD side just at a lower level then the port side or there is no audible music and then all of a sudden theres music and its the same level both side?
Try swapping the left and right RCA at the amp and retest.
Are the tower speakers and cabin speakers on completely different volume zones or are the tower speakers and some of the cabin speakers on the same zone? If its got the old fusion 205 media unit, it requires a high/speaker to low/RCA line converter to have that zone 2 RCA for the tower amp and it also requires the cabin speakers to all be wired to an external amp.
Will do this weekend when I get back to the boat. Just odd that when I crank it up really loud it kicks on.Quote:
Originally Posted by MLA
No volume at all in that side until cranked up really loud.
Sent from my iPhone using Tapatalk
There is no volume at all on that side until it is cranked up really loud.Quote:
Originally Posted by Wdavid
Sent from my iPhone using Tapatalk
Will do. Thank youQuote:
Originally Posted by Holdmybeer
Sent from my iPhone using Tapatalk