I got to thinking yesterday….we have a 17 SA with three pumps. Think I could plumb 3 more into our current system? I’m good with plumbing and decent with electrical stuff. Thoughts?
Sent from my iPhone using Tapatalk
Printable View
I got to thinking yesterday….we have a 17 SA with three pumps. Think I could plumb 3 more into our current system? I’m good with plumbing and decent with electrical stuff. Thoughts?
Sent from my iPhone using Tapatalk
Short answer, yes. I think the biggest hurdle is going to be having an unused port on the sac/tank for filling/draining.
Maybe I’m under thinking the project. I was thinking I could plumb them in series with the same fill port tube. Maybe not?
Sent from my iPhone using Tapatalk
The only gain is going to be parallel pumps or higher capacity pumps. With 2 pumps in series, your final flow rate is likely going to be that of the last pump, rather then summed flow rate of the 2 pumps.
Now that I think about it this totally makes sense.
I’ve got done planning to do if I do this. Might try to tackle it in the winter time when I take the bags off.
What about the electric? Can I just splice in-line or will that trip a fuse?
Sent from my iPhone using Tapatalk
Start up amps on a jabsco puppy pump is around 20 amps. You may need to upgrade breakers.
Perhaps upgrade to a jabsco king pump?
King 15GPM
Puppy 9 GPM
Sent from my iPhone using Tapatalk
Hrmmm, maybe kings are only 11 gpm and they would require a 25amp circuit versus a 20amp.https://uploads.tapatalk-cdn.com/202...20f45dbdd2.jpg
Sent from my iPhone using Tapatalk
Thanks bro. Looks like I’m back to planning plan A of 6 puppies in parallel.
Sent from my iPhone using Tapatalk