Printable View
I have a 2020 Moomba Craz. It did not come with board racks. I ordered Wake/surf racks and mag swivels from Roswell. When you look at The Moomba A3 Tower page on Roswell's site, there is what appears to be a spacer between the swivel and the board rack backing plate. I cannot find this part to order. Is it needed or not necessary? Anyone with a similar experience?
Just call roswell and ask?
I would think any Tower Adaptor would be sold through Roswell for the different rack options.
Not sure why that part would not be sold with the racks.
I think you’re talking about this? I’m pretty sure you don’t need it. My racks came fixed to the tower and I think that was just a spacer between the tower and the backing plate. I put it on my swivels but don’t think it was necessary. Maybe it’s to accommodate for longer screws when the rack is fixed? I know that’s not a very definitive answer, but I think you can mount the plate directly to the swivel.Quote:
Originally Posted by SW_WAKE
If you look at the photo at the top of the “Board Racks” tab on the website, there is no spacer installed on that one.
https://uploads.tapatalk-cdn.com/202...cd638a3e05.jpg
In looking at my setup, I also think it is just a spacer you don't need. Mine is installed with swivel, but I don't notice where there would be interference without it. Roswell's instructions even call it a spacer.
Bumping this thread. I just got some used fixed elite racks for my Max. I see on the Roswell instructions there is a spacer but the racks did not come with them. Just wondering if I can bolt the racks backing plate directly to my tower without the spacer if I get some screws that won’t interfere? See this link https://www.manualslib.com/manual/16...page=22#manual. The spacer isn’t on Roswell’s site so I will likely call them but figured I’d ask here first.
Scratch that. I have the spacers on the racks. I’ll get some screws at Lowe’s now that I know the size.