Adding Enzo’s to 2020 mojo with G6/ ballast sensors

Hello, just picked up a 2020 Mojo with autowake/flow/ and G6 pumps. We often run a very small crew .... my wife 2 small children and a small 3rd. Factory 900 bags with IBS is not nearly enough to get any push at all. We could surf my old LSV no problem. I’m looking to upgrade to Enzo’s but with the new ballast sensor technology it looks like I need 3 ports on the bottom rear of the Enzo bags and they only come with 2 ports..... is there a way to still run Enzo’s or do I have to go down to WakeMAKERS 1270 custom bags?

I’m pretty sure my 2020 Mojo came stock with 1100’s. I had a pair of 400’s lying around that I put in front of the stock bags that I just leave filled. I also ppl
also put a 400 under the bow filler cushion. I have run out of space for soft ballast so I am going to add 350-400 lbs of lead for good measure. The surf wave is good now but should be even better with the lead.

Back to my point. Make sure you don’t already have the 1100’s. If you do, make the leap to the 1450’s. The Mojo wave seams to just get better with every increase in ballast that I add.

Stock 2019+ come with 900 each rear locker, 700 hard tank front center and 500 IBS.... total of 3000lbs stock. Do the 400’s fit well under the side seat cushion? I have a couple extra 400s lying around.... ordered some stuff to try and piggy back off the stock 900. We’ll see.

I upgraded to 1100's on my mojo, had ok wave, then went to Enzo's. Had IBS and hard tank and wave was great. But, You loose all your storage. If I had to do it again I would have kept the 1100's and added 400 lbs lead each side, equally distributed and kept my storage. Storage is indispensable in a boat, especially if you have a couple of families and kids and everyone's stuff.
You can fit 200 lbs lead under each 1100 lb bag and 150 # each side mid ship and 100 under the ibs.

I just ordered customs for my 2016 mojo because I thought I could make them fit better to my boat. Don’t think it was much more than the Enzo’s price wise, but I more weight too and I saved some room:


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by Tylerrnemt

Stock 2019+ come with 900 each rear locker, 700 hard tank front center and 500 IBS.... total of 3000lbs stock. Do the 400’s fit well under the side seat cushion? I have a couple extra 400s lying around.... ordered some stuff to try and piggy back off the stock 900. We’ll see.

---

I have the heater so it wasn’t a perfect fit under the starboard seat but fit perfectly under the port side seat.

In my 16 mojo, I have the 1100 wakemakers bag rear and a 475 sumo bag under mid seats, this fits perfectly with the heater and leaves a little room on starboard side for storage. I originally piggybacked the mids to the rear, but I was having draining problems. Now I have a T on the back so a separate hose goes to each, I also have the mid bag vent T'ed into the rear vent. Works perfectly now. If I were to do it again, I think I would just do a custom bag made like an Enzo, I bet with custom measurements you could get a bag that could be 1700 lbs to fit.

Sent from my SM-G988U using Tapatalk