Holdmybeer
Senior Member

Not sure about the new covers. My 2015 cover has access for the cleats. Also have a zippered access forbthe full door. Wonder why Skiers would...

Very familiar with this concept. However, are you familiar with letting a sleeping dog lie? This man went through the time to build something for...

Great work! How does it sound? For what you have in it, if the box last 2 years it will be good enough. More than likely will last longer. Just...

That tool was worth the $40 several years ago. It has also netted me lots of free beer for helping.

Under the port side locker is a 12v bus lug and ground lug that the amps use. They come straight from the battery switch and would be where I would...

Actually I am wrong here. The replacement pump is a Jabsco Puppy 18670 series - 8-9 GPM. They are $385 and discontinued. Wakemakers is selling...

Low oil level. If you had your key on while changing oil it triggers it. Like myself most people have the radio on while doing maintenance. If...

The windings are shot. Not worth rebuilding. New one is $200, and I never have seen a rebuild kit for the motor.

It will fit jist fine. You only have a single strut verses the double strut of the newer boats. You can either cut a groove in the front and make...

It would be awesome if my spin on was top mounted and not hanging. Makes a mess everytime hanging down.

If you have the G3 system...3 pumps. All the ballast pumps are behind false walls on the back rear lockers. If you have the G6 system....6 pumps....

Just some friendly advise....the screw on clevis comes loose over time. Quick way to throw a box anchor out and get nothing but the leader pole...

Is this the amp for the 6 cabin/bow speakers? Is this also your subwoofer amp?

If you crawl under the dash the factory harness is just a couple of white connectors. The Fusion radio harness is wired to 1 of those. Follow...

How does that do with GSA and "surf gate" combined? Any videos?

This might be true for newer boats but my 2015 was not. The yellow and red were connected via factory harness and landed on switched power from the...

The thread pitch should be the same. I forgot that the flange one is low profile version. The picture is a screen shot from McMaster Carr. I would...

Yes that will work. The shaft 1-1/8". I installed a Glide Bearing in mine. Tim @Glide is a good guy and price was right. I thought the prop nut...

So....that should never happen. Did someone service your boat recently? The shaft is tapered which makes it easy to get in but not out. Also my...

I have seen this wiring several ways. 4-channel amp - bow is channel 3 and 4 and cabins are bridged. Port side 2 speakers channel 1 and starboard...

6.5 will fit. There is nothing in the bow to really reflect the sound. Almost needs free air 6.5 speakers. Your lack of forward volume is...

Best part of that video.....Supercharger whine!

Over heating usually warps the metal and causes dissimmetals to seize. Aluminum pistons will swell and burn out the rings before melt down. The...

From their website replacement parts it list a Fuel Formula 1 255/55r18. I had trouble finding them. This was the only listing. I would buy...

I figured 1 in each bag but I don't think it will fit on the bow bag. Certainly would help on my 1100's in the rear.

Super old thread, but trying to not fight the air this season. How are these working for you? Do you still use them? $7 each x 3 is a cheap $21...

You went from 900lb bags to 1,270lb bags. Roughly 48 more gallons of water. G3 pump setup is 11gpm so 4 extra minutes or 13min total. G6 ballast...

You can get the 70 to do zone control but it is a total pain. I had mine for cabin, bow, and sub on zone 1 and tower on zone 2. I then had to...

THIS! MLA is not wrong. Having the constant power and switched power both on the ignition acc. is what popped my radio.