Holdmybeer
Senior Member

That explains a lot. I gave up social media years ago and had no idea. Good to know the knowledge is staying protected on the forum.

Ohio was not busy this year either. Several people new to the wake boat scene in my local lakes but they weren't regulars through the summer. I...

Tommy, You ever get your overheating issue resolved?

You ever figure it out?

Might need a software update. This was mentioned from other Moomba owners around 2020-2022. Dealer can do the flash since you are still in...

How is water depth at the other 3 in late June - July? I know Norris is 80-300ft deep. Safe to assume the other 3 are similar? We boat in...

When you say "locks up" is the motor vapor locking of so flooded it physically has too much gas in the cylinder bore? Vapor lock I understand. ...

What year? Skiers stops making replacements after 5-7yrs so based on age you might have to find a local shop.

I have a 2015 Mojo. It is tight but being 23ft long everything is a little stretched out. I had about 8" from driplees seal to coupler. The...

If you need help, reach out. Never broke a shaft but did have to remove everything you are to replace my dripless. Tim @ Glide helped me get...

Fantastic. I'm sure the dropstep, thrusters, e-pex tower, etc. all add extra weight also. 10k+ weight all full then add gear, fuel and people

The added weight is impressive on the Max. I was hoping to see this on the Mojo and Makai also. However, seeing the dropstep come to the Moomba line...

I can fix this for you. I had the same issue and had to MacGyver it on the water. From the top of the coolant reservior there is a small 1/4"...

If the v-drive is over filled, when it gets hot or under heavy load, the fluid can burp out of the vent on top. It's painted black and it a metal...

I see you did the right thing. Just drink a beer, laugh, and tackle 1 problem at a time. Not worth ruining good memories over a bad attitude. ...