PDA

View Full Version : Different Size Clamps



viking
10-25-2009, 05:19 PM
Anybody know where to go to get different size clamps?
I've got 2inch Roswell speaker clamps and need 1-5/8. 4 of them!

I've found some on DIY Wake! Don't know if they are just a quick changout?

Thanks

jmvotto
10-25-2009, 05:25 PM
they have them on ebay as well.25.00 if they are single post mounts

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230363035239&ssPageName=STRK:MEWAX:IT

viking
10-25-2009, 05:39 PM
Thanks........
Do you need to get some padding or rubber to put around the tower for cushion first? With these off ebay or anywhere?

jmvotto
10-25-2009, 05:46 PM
They should come with them, but if not then lowes home depot in the plumbing dept for rubber hose, cut to fit.

http://www.lowes.com/lowes/lkn?action=productDetail&productId=23440-34146-RTDPC&lpage=none

cab13367
10-25-2009, 07:26 PM
You could probably also use an old bicycle tube (cut to fit) if you need something thin.

jeanfgodin
10-26-2009, 01:02 PM
Hi Viking,

I bought this clamp on eBay for my 2" 3/8 tower: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230363035239&ssPageName=STRK:MEWAX:IT

You don't need rubber, the clamp is very tight.