PDA

View Full Version : Skeg problem...



jon_n_andrea
02-19-2004, 05:54 PM
I have a 1999 Moomba Outback LS. It was recently in a horrendous accident where a semi-truck plowed into the back of it on the LA freeway...not pretty. Believe it or not, the boat was still salvagable and will be out of the fiberglass shop next week. I have been looking for a new skeg for the bottom of the boat because one of them is bent a little bit. If anyone wants to see pictures of the wreck...email me and I'll send them to you. Although, be prepared, they're not pretty pictures. Thanks. Hope someone can help me.

Jon

jon_n_andrea
02-19-2004, 05:56 PM
Sorry, my email address is: [email protected]

tygger6069
02-20-2004, 12:18 AM
jon_n_andrea

Sorry about your accident, hope all is getting better down your way. You might check with your local dealer or with Skiers Chioce for the skeg(aka tracking fin). They should be able to hook you up. Also you might check with your local prop shop to see if they can straighten it for you. Hope that this helps. Would like to see the photos so will contact you by email soon.

chris_5
02-20-2004, 02:52 PM
Here are the pics of jon_n_andrea crash.
http://www.angelfire.com/extreme4/chris_5/moombaboard/crash1.jpg

http://www.angelfire.com/extreme4/chris_5/moombaboard/crash2.jpg

http://www.angelfire.com/extreme4/chris_5/moombaboard/crash3.jpg

http://www.angelfire.com/extreme4/chris_5/moombaboard/crash4.jpg

http://www.angelfire.com/extreme4/chris_5/moombaboard/crash5.jpg

http://www.angelfire.com/extreme4/chris_5/moombaboard/crash6.jpg

http://www.angelfire.com/extreme4/chris_5/moombaboard/crash7.jpg