PDA

View Full Version : Kill Switch Position



Garn
01-05-2009, 11:34 AM
One thing that I absolutely hate about my 2007 Mobius LS is the position of the kill switch. It is directly in line with my seat. So when I slide the driver's seat forward, it runs into the kill switch and my boat instantly shuts down. I hate this! Does anyone else have this problem? If so, is there anything that can be done about it?

Thanks,

Garn

04OUTBACK
01-05-2009, 10:23 PM
Somehow I sometimes bump mine with the leg.. just enough to make it sputter...

moombadaze
01-06-2009, 08:23 AM
Garn, ive got a 08 lsv and the kill cord is right next to the light for the v drive-below the throttle-ive never hit it. is yours in the same place?

Sled491
01-07-2009, 12:01 AM
I have a similar problem on my 07 Outback, but its more from my surf board bumping into it. Maybe you need to do an Ian Ashton move and remount your seat a bit to center.

maxpower220
01-07-2009, 11:54 AM
It is a simple switch in either the open or closed position. It would be very easy to by-pass it altogether. However, I believe that some state laws require it.

zabooda
01-07-2009, 12:30 PM
By pass the switch now or do it when your in the middle of nowhere as some people had to do.