View Full Version : Thread Treatment during Winterization
Waynes345
10-09-2008, 08:30 PM
Does anyone use any kind of thread treatment on the manifold plugs, etc. when replacing after draining and flushing? TFS Paste or anything like that?
hiqualityH2O
10-09-2008, 09:13 PM
I always use vasoline. The block plugs always come out easily at the end of the season.
cab13367
10-10-2008, 12:01 AM
I always use vasoline. The block plugs always come out easily at the end of the season.
I use teflon tape.
VA LSV
10-13-2008, 02:01 PM
Teflon tape also. I leave the plugs out over winter. Last year rust built up in the block threads and had to clean them up with a tap before the plugs would start back.
Mikey
10-13-2008, 02:48 PM
Teflon tape is good and as for cleaning threads if required a fitting brush for copper fittings works well. Just use gently and all should be good.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.