PDA

View Full Version : driver seat removal 07 LSV



Hillbilly
10-06-2008, 01:09 AM
I need to take out my driver seat to build a sub box. Is there a quick release or do I have to unbolt it from the floor? Thanks guy's

jmvotto
10-06-2008, 07:10 AM
i think you have to take out all four bolts, IMHO.

Razzman
10-06-2008, 11:45 AM
Pull out the bottom cushion, remove the five bolts holding the seat in. Pay attention as there are spacers under the seat. You can then remove the track if neccesary by the access door below the front of the seat.

Razzman
10-06-2008, 11:58 AM
Also, i would recommend replacing the nuts on the seat bolts to nylocks. The bolts mount from the bottom and when the nuts come loose (and they will) the bolts fall out of the seat and it becomes real loose!

Hillbilly
10-07-2008, 02:15 AM
Thanks guy's. Razzman that was your boat in the post on wakeworld right, With the kicker sub? I want to put my 12 PPI in the same location and I showed that to my friend and he is jonesen to do it to my boat. It looks incredible.....

Razzman
10-07-2008, 01:55 PM
Nope that's not my boat.

04OUTBACK
10-09-2008, 01:24 AM
I think that was Newty.. and I just realized I referred you to Razzman in the othe post.. look up NEWTY on here.