View Full Version : driver seat removal 07 LSV
10-06-2008, 01:09 AM
I need to take out my driver seat to build a sub box. Is there a quick release or do I have to unbolt it from the floor? Thanks guy's
10-06-2008, 07:10 AM
i think you have to take out all four bolts, IMHO.
10-06-2008, 11:45 AM
Pull out the bottom cushion, remove the five bolts holding the seat in. Pay attention as there are spacers under the seat. You can then remove the track if neccesary by the access door below the front of the seat.
10-06-2008, 11:58 AM
Also, i would recommend replacing the nuts on the seat bolts to nylocks. The bolts mount from the bottom and when the nuts come loose (and they will) the bolts fall out of the seat and it becomes real loose!
10-07-2008, 02:15 AM
Thanks guy's. Razzman that was your boat in the post on wakeworld right, With the kicker sub? I want to put my 12 PPI in the same location and I showed that to my friend and he is jonesen to do it to my boat. It looks incredible.....
10-07-2008, 01:55 PM
Nope that's not my boat.
10-09-2008, 01:24 AM
I think that was Newty.. and I just realized I referred you to Razzman in the othe post.. look up NEWTY on here.
Powered by vBulletin® Version 4.2.3 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.