PDA

View Full Version : torque setting on prop nut


voutback
08-19-2008, 01:05 PM
Does anybody bother to set the prop nut to a specific torque when putting the prop back on? If so, what is a good setting to use?

I don't think the boat really should change the torque setting. But I have a 4 blade (14x14.25) on a '08 Outback V.

thx,

Voutback.
voutback
08-21-2008, 12:14 AM
Documentation that comes with ACME prop indicates no more than 30 ft-lbs.

Voutback.