Wakeplate Position Indicator Gauge

[Reese350]

My wakeplate works fine but the position indicator gauge is stuck. I suspect there is a problem with the sensor on the cylinder.

Anyone have anidea where the sensor is or what else could be wrong?

Thanks in advance!

Scott
06 LSV

[Mobidick]

Scott

I had the same problem. I took it to my dealer and they found that it was just a loose wire on the back of the gauge.

[Reese350]

Thanks for the heads up. I'll check it out tomorrow morning when we get to the lake.

Cheers

[Reese350]

Mobi,

You nailed it. I cut and re-crimped the 3 wires going into the gauge and wallah, it works again!

Thanks for the direction, I owe you one!

Scott

[Mobidick]

Scott,

OUTSTANDING!!! I'm glad I was able to contribute to this great board.

Mobi