PDA

View Full Version : Flame Arrestor Replacement



dlb03moomba
06-24-2008, 11:03 PM
Have an 03 LSV with the 5.7L FI 330 HP motor. Where can I get a replacement flame arrestor? Are these filters cleanable?

David

04OUTBACK
06-24-2008, 11:58 PM
David,
I have been looking into replacing mine with a K&N... They have info on their site.
I ran a K & N in my Tahoe for about 70k miles.. kinda hard to tell much difference..but I think it was a little better. Other than that, check with your dealer..
Here is the reference for Indmar motors:
Indmar

Engine & Fuel System Size Total Ht Element Ht Part # Footnotes
5.7L LS-1 Corvette MPI 5.7L V8 N/A N/A N/A
5.7L Hammerhead 2 bbl 5.7L V8 N/A N/A N/A
5.7L Monsoon EFI 5.7L V8 N/A N/A N/A
5.7L Malibu Vortec 4 bbl 5.7L V8 3.75" 2" 59-3264 1
5.7l Vortec Carb 4 bbl 5.7L V8 3.75" 2" 59-3264 1
5.7L Vortec PFI 5.7L V8 N/A N/A N/A
5.7L Vortec TBI 5.7L V8 3.75" 2" 59-3264 1,3
7.4L 4 bbl 7.4L V8 3.75" 2" 59-3264 1
7.4L MPI 7.4L V8 N/A N/A 59-5020
8.1L 4 bbl 8.1L V8 4.50" 2.75" 59-3364 1,2
8.1L PFI 8.1L V8 N/A N/A 59-5020