Aquaholic
04-24-2008, 12:54 AM
This is the led remote that I will be installing to the cockpit area.
http://i263.photobucket.com/albums/ii156/zcannaday/CMRC1-BSS1.jpg
I have 2 ideas on location for remote, one would be just to the right of the keyed ingition and move the 12v plug and relocate it to another place more useful. I would remove the aeware remote and replace it with a custom made aluminum cnc moomba logo that would be stepped down twice and then chromed.
http://i263.photobucket.com/albums/ii156/zcannaday/moomba008.jpg
the second consideration would be to the right side where the two gauges not on the dash are located, near the arm rest. I would move the depth gauge to the dash and make the aluminum cover to be a bezel for the depth gauge. Then move the trim indicator the bottom hole. Then place the remote in the upper spot of the two holes.
Thoughts............
http://i263.photobucket.com/albums/ii156/zcannaday/CMRC1-BSS1.jpg
I have 2 ideas on location for remote, one would be just to the right of the keyed ingition and move the 12v plug and relocate it to another place more useful. I would remove the aeware remote and replace it with a custom made aluminum cnc moomba logo that would be stepped down twice and then chromed.
http://i263.photobucket.com/albums/ii156/zcannaday/moomba008.jpg
the second consideration would be to the right side where the two gauges not on the dash are located, near the arm rest. I would move the depth gauge to the dash and make the aluminum cover to be a bezel for the depth gauge. Then move the trim indicator the bottom hole. Then place the remote in the upper spot of the two holes.
Thoughts............