PDA

View Full Version : Boat Buddy latch



bamaspiveys
03-09-2008, 10:50 AM
Anyone use the Boat Buddy latch?

My 1993 Mastercraft came with one and Boatmate offers it as an option, just wondering if anyone still uses them?

My trailer did not come with one but they are easy to add, just replace the bumpstop/roller.


http://www.boatmatetrailers.com/images/BoatBuddy.jpg

Aquaholic
03-09-2008, 03:23 PM
I have used them with other peoples boats and my opinion is that I don't care for them.
I feel that it causes nose damage over time plus you might have new

people that want to help you load the boat that may be over confident in

driving and accidentailly damage boat. Its far better for the boat in the

long run to drive on trailer, then slowly back to the nose and crank the

handle tight. Get your self a stutz roller, they are the yellowee clear

NONE mar-ing. This is the best, least expensive solution. If you have

black marks on the nose that are suburn to get off use acetone. Its safe

on gelcoat but you have to rewax the cleaned area.

bamaspiveys
03-09-2008, 03:44 PM
Aquaholic
Where do you ski?

We are mostly up at Center Hill, but go to Tims Ford occasionally.

bamaspiveys
03-09-2008, 03:51 PM
My wife and I swap out backing the trailer or driving the boat, so I am not concerned with other people being involved. I like the ability to quick latch and pull out without anyone getting out ofthe truck or the boat.


Where I grew up everyone had one, 20 years later I am back into boating and I did not seea single trailer with one last season.

So I was just wondering>>>>>

maxpower220
03-09-2008, 04:16 PM
After having 2 MC boats with Boat Buddies, I couldn't think of not having one. I picked up one from ebay NIB. When my trailer (and boat) get made (April), I will be installing it on the trailer.

It just makes loading so much easier.