flienlow
06-17-2024, 10:12 AM
Does anyone know how to troubleshoot the G6 ballast system?
Starboard ballast will not fill. Motors will not run.
The control boxes on both port and starboard side are made by BlueWater Enterprises. Inside both boxes is a "Motor Reversing Module" Pn 2300-1001.
Most call them relays. When I hit the ballast switch. I get 14v. to the pump motor... BUT THEY DONT WORK!! IF I take the same pump motor to port side, it has 14v as well an the same motor will work on that side. I am a bit perplexed.
I hear the relays clicking. I have good voltages to both boxes. I have continuity across the right side relay on both boxes, but not the left. I really dont know how to test this other than what I have done.
The issue will either be the Motor Reversing Module ( one or both since the port seems to feed the starboard side.) or it might be another computer type module behind the engine that have red/yellow wires going to it.
"Take it to your dealer!" -They are booked until mid July trying to self help to get us going.
Any Moomba guys on here that can help?
Starboard ballast will not fill. Motors will not run.
The control boxes on both port and starboard side are made by BlueWater Enterprises. Inside both boxes is a "Motor Reversing Module" Pn 2300-1001.
Most call them relays. When I hit the ballast switch. I get 14v. to the pump motor... BUT THEY DONT WORK!! IF I take the same pump motor to port side, it has 14v as well an the same motor will work on that side. I am a bit perplexed.
I hear the relays clicking. I have good voltages to both boxes. I have continuity across the right side relay on both boxes, but not the left. I really dont know how to test this other than what I have done.
The issue will either be the Motor Reversing Module ( one or both since the port seems to feed the starboard side.) or it might be another computer type module behind the engine that have red/yellow wires going to it.
"Take it to your dealer!" -They are booked until mid July trying to self help to get us going.
Any Moomba guys on here that can help?