PDA

View Full Version : 2009 Moomba exhaust hoses



Pnut80
06-10-2024, 05:08 PM
My son just bought a 09 Mobius Lsv. Its leaking at the rear where exhaust tubes go out rear fiberglass. I have looked for replacement flaps and hoses but am not having any luck. does anyone know where i can look or what to do to stop this leaking?


Thanks

HFarr
06-10-2024, 06:18 PM
Can you take a photo? Is it leaking where it joins/touches the fiberglass or at a fitting? And by leaking, I am guessing you mean water is coming in and not an exhaust gas leak?

Sent from my SM-G781V using Tapatalk

trayson
06-10-2024, 07:51 PM
The if you're thinking that the problem is the plastic through hulls themselves, those parts are no longer available. I had to go to great lengths to find some stainless steel ones that would even fit and work as a replacement. It meant new elbows on the inside and new connections to my homemade fresh air exhaust surf pipe on the outside. And simply drilling a few new mounting screw holes. Oh and I also had to cut off a little of the through hull pipes I bought, Because they had this weird funky downturn that I didn't need.

My plastic through hulls ultimately failed because they melted because something affected the cooling of the engine like the cover popping off the raw water pump, or the raw water pump not priming, or the valve being Left on running it from the hose versus pulling from the raw water intake... Whatever the reason, if your engine gets hot enough it will melt the plastic and the OEM elbows won't be able to clamp on them effectively.

Sent from my SM-A546E using Tapatalk

DOCDRS
06-14-2024, 12:38 AM
Just loosen the screws at the back of the transom pull the fitting out a bit and re silicone it back onto the hull, did this on my 09 supra