June 2024 photos and videos

[haknslash]

Today we got to Lake Martin for our annual week vacation. VRBO rental is pretty nice and tucked into the back of a cove. Diggin this spot!

https://i.imgur.com/2OofC3g.jpeg

https://i.imgur.com/81XHayt.jpeg

https://i.imgur.com/9qpbFaQ.jpeg

https://i.imgur.com/YPuYgtK.jpeg

[sandm]

pretty nice digs.... I could live there :)

[haknslash]

Me too! Told my wife let’s just become squatters :D

Trying something new. Phase 5 kneeboarding :D

https://i.imgur.com/hYtjyYJ.jpeg

[Dukabor]

What a great spot…. Would be hard to leave….

[mgswake]

Looks amazing, only thing missing from perfection is a shiny new SV on the dock!!!

[Dukabor]

The Max looks pretty good out there I’d say!

[mgswake]

The Max looks pretty good out there I’d say!

Oh yeah, the blue pops. He has a beautiful Max! I have the Ultra blue flake on my Supra. I think that’s the color of his Max. I just commented about the SV because I know he demod one and really likes it.

[haknslash]

Yup it’s ultra blue flake and definitely pop on the water! As much as I love my Max I’d love to upgrade into the SV. It is an amazing boat! My dialed in wave is a bit larger and cleaner, but it doesn’t have the same level of push and firmness the SV had. It’s a really nice boat!

[brad460]

The weather is WI has been odd this spring/early summer. Rain every other day, warm, cold..haven’t been using the boat..So instead we went racing this past weekend..Half the day was nice and sunny, the other have cloudy and windy..

https://uploads.tapatalk-cdn.com/20240610/eccf110fe831f80b701dba64de6ad766.jpg
https://uploads.tapatalk-cdn.com/20240610/6bf869d69d2b65c7b1a1d4fc06623f67.jpg


Sent from my iPad using Tapatalk

[Dukabor]

Prepping for the season and was going for another upgrade to the stiffening of the engine panels….. have a look at what the panels look like before I stiffen up the lower portion….

https://uploads.tapatalk-cdn.com/20240610/7bdb01d3ffa3f7bb7ce70b3a357008e4.jpg


Will be drilling and bolting the existing angle iron through the panel as well as running some additional angle iron perpendicular to the existing and parallel to, and as close to the channel where the panel sits on the bottom

Sent from my iPad using Tapatalk

[haknslash]

Ole Moombae just basking in her element :)

https://i.imgur.com/3usAsE1.jpeg

https://i.imgur.com/4gpIa9d.jpeg

[Dukabor]

Ole Moombae just basking in her element :)

https://i.imgur.com/3usAsE1.jpeg

https://i.imgur.com/4gpIa9d.jpeg

Thats worthy of a post quote just to see it again !!!

[HFarr]

Nice looking shot!

Sent from my SM-G781V using Tapatalk

[HFarr]

Prepping for the season and was going for another upgrade to the stiffening of the engine panels….. have a look at what the panels look like before I stiffen up the lower portion….

https://uploads.tapatalk-cdn.com/20240610/7bdb01d3ffa3f7bb7ce70b3a357008e4.jpg


Will be drilling and bolting the existing angle iron through the panel as well as running some additional angle iron perpendicular to the existing and parallel to, and as close to the channel where the panel sits on the bottom

Sent from my iPad using TapatalkYou will have to let us see the finished product. I ran some metal c-channel down mine just as you did. I ran it to just above where it fits into the track and bolted it about 2" from the end. Though not nearly as often, the dang thing still pops out on a really hot day! That poly will flex right at the bottom. Crazy!https://uploads.tapatalk-cdn.com/20240611/180a537f11958c57b8d2bee5f5fe97aa.jpg

Sent from my SM-G781V using Tapatalk

[RUGER761]

Hak, looks like a nice vacation and great pics, that Max sure does shine on the water.

[rockymtnsurfer]

Prepping for the season and was going for another upgrade to the stiffening of the engine panels….. have a look at what the panels look like before I stiffen up the lower portion….

https://uploads.tapatalk-cdn.com/20240610/7bdb01d3ffa3f7bb7ce70b3a357008e4.jpg


Will be drilling and bolting the existing angle iron through the panel as well as running some additional angle iron perpendicular to the existing and parallel to, and as close to the channel where the panel sits on the bottom

Sent from my iPad using Tapatalk

I did the exact thing you are.....every panel including the back. I was so over a panel bending and some popping that I just said $#$% it. and did all of them. Excited to see how they work out. I also fabricated 4 "L" brackets for the rear channels on the inside. I think mine take a lot of abuse because they are not always full and the sloshing of the bags does a number on them. That's the only thing I can think of. Hope it works out!

[Holdmybeer]

The panel popping is more from the bottom track not being tall enough. If you can replace those with taller c-channel it will help a lot.

Mine don't pop in my mojo but my 1300's are long and end up tucking under the seat space instead of getting fat wide and popping panels.

[Dukabor]

Thanks for the thoughts and ideas gents…..

I have a few things working against me here…. Mostly the lead ballast under the rear bags which brings the bags up higher and potentially putting even more pressure on the panels….

That being said my panels popped with stock bags and no lead, and of course that just continued with the larger bags and ballast….

I am going to not only strengthen up the bottom of the panels with some additional angle iron, but will also devise something for the lower channel the panels sit in, I am debating on a taller channel the whole length or several L brackets along it….

Follow along for the journey….

Of course, I was going to let the ideas percolate while I swapped out my stock board racks (bungees) to the Roswell Triton 2’s I bought, and that has devolved into a nightmare with 5 of the 8 bolts coming out “easily”, while 2 rounded heads and one snapped off the 5/32 hex tool inside of it, and that was after heating them up significantly to lessen the effect of the thread locker…..

Thankfully the weather is not great so I have some time to get this done but to some up this day in a word i would say….

FFFFFFFFUUUUUUUUUUUUUU

Good thing I enjoy this stuff !

[Holdmybeer]

Thanks for the thoughts and ideas gents…..

I have a few things working against me here…. Mostly the lead ballast under the rear bags which brings the bags up higher and potentially putting even more pressure on the panels….

That being said my panels popped with stock bags and no lead, and of course that just continued with the larger bags and ballast….

I am going to not only strengthen up the bottom of the panels with some additional angle iron, but will also devise something for the lower channel the panels sit in, I am debating on a taller channel the whole length or several L brackets along it….

Follow along for the journey….

Of course, I was going to let the ideas percolate while I swapped out my stock board racks (bungees) to the Roswell Triton 2’s I bought, and that has devolved into a nightmare with 5 of the 8 bolts coming out “easily”, while 2 rounded heads and one snapped off the 5/32 hex tool inside of it, and that was after heating them up significantly to lessen the effect of the thread locker…..

Thankfully the weather is not great so I have some time to get this done but to some up this day in a word i would say….

FFFFFFFFUUUUUUUUUUUUUU

Good thing I enjoy this stuff !

I know all to well the bolts on the board racks.
Roswell uses red loctite on steroids. I changed mine out to socket caps instead of button heads. I had to drill 2 of them when swapping tines and heat and vise grip the remaining piece out. What I nightmare, but it was winter sso just a reason to be in the shop.

[Dukabor]

Well…. I feel like I accomplished something today….

Yes, I had to drill the remaining three bolts out, and will look to replace that countersunk Allen head hardware with something less prone to this….

Usually getting them heated up with a torch will loosen up that loctite but these last three were a pain in the ass…. Though just to give me the middle finger, once i drilled them out 2 of the 3 unscrewed by hand and the last one needed more heat persuasion

https://uploads.tapatalk-cdn.com/20240612/e18cb70fa8a4173ddb44cf8ff3cb9acd.jpg


Sent from my iPad using Tapatalk

[Dukabor]

And since I have already been drilling away, I may try one more thing on the board racks…. The Moombas have two positions for the board racks, outside the boat and then inside the boat while the Supras (and others) have a third ‘middle’ position…. That middle position allows for the racks to be more ‘parallel’ to the boat, and less in the way in this neutral position (assuming there are no boards in them)…. Will only require one hole to be drilled on the bottom of the bracket (circled in red below)

I’ve probably confused the heck out of everyone with that description…


Sent from my iPad using Tapatalk

31035

[haknslash]

That is why I used blue loctite on my racks when I installed them lol. But hey, you got it done and ready for the Tritons! I also agree with the others in the lower channel is the biggest culprit in letting the panels flex out of the channel. Beefing up the panels I’m sure helps but while you’re at it I’d go ahead and beef up the track.

[haknslash]

We are headed back home tomorrow and it’s been a great vacation. This is one of our favorite coves to anchor and chill.

https://i.imgur.com/swxMh9m.jpeg

https://i.imgur.com/nNN7puF.jpeg

https://i.imgur.com/RayxdrT.jpeg

https://i.imgur.com/xccyNHi.jpeg

[haknslash]

Got a nice sunset last night too.

https://i.imgur.com/6mYxtpi.jpeg

[Dukabor]

Got a nice sunset last night too.

https://i.imgur.com/6mYxtpi.jpeg

Thats beautiful!!! You are my inspiration to hammer through and get this stuff done and out on the water myself !!

[Holdmybeer]

And since I have already been drilling away, I may try one more thing on the board racks…. The Moombas have two positions for the board racks, outside the boat and then inside the boat while the Supras (and others) have a third ‘middle’ position…. That middle position allows for the racks to be more ‘parallel’ to the boat, and less in the way in this neutral position (assuming there are no boards in them)…. Will only require one hole to be drilled on the bottom of the bracket (circled in red below)

I’ve probably confused the heck out of everyone with that description…


Sent from my iPad using Tapatalk

31035

The old school pin pull swivel racks has 3 positions like the Supras. The mag swivels like you have only have the 2 positions but not sure if just drilling a hole will allow this. If the pin just drops in then you should be able to jist drill and go. If it doesn't work it's a $250 mistake, just giving you a heads up.

[rockymtnsurfer]

[QUOTE=haknslash;386921]We are headed back home tomorrow and it’s been a great vacation. This is one of our favorite coves to anchor and chill.

https://i.imgur.com/swxMh9m.jpeg


Nice to see some board racks on that boat Hak:)

[HFarr]

Wow. Those place really looks peaceful!

Sent from my SM-G781V using Tapatalk

[MJHSupra]

We are headed back home tomorrow and it’s been a great vacation. This is one of our favorite coves to anchor and chill.

https://i.imgur.com/swxMh9m.jpeg




Hope you were able to get some AM riding. Love the vacay days of riding first thing in the AM, heading back for breakfast, packing the cooler for the afternoon, and spending the rest of the day hanging on the lake.

[HFarr]

Let me know how the new hole in the board rack swivel works out. It would be nice for them to be straight back when cruising without boards.

Sent from my SM-G781V using Tapatalk

[Dukabor]

I have found a potential hurdle in my board rack plan….

While the pin will drop in to hold the rack in that ‘middle’ position, it will not fully drop in and ‘lock’ in place without some additional modifications…


https://uploads.tapatalk-cdn.com/20240612/d651126fa7da4a8e3a5ff4d9b95c9ac8.jpg

In the photo you can see on the upper portion where it has an additional slot that allows the pin to full drop…. I will examine further but I think the plan will require more machining to have it fully drop into place….

I may (at this point) cut my losses and move onto just installing the new board racks, finish up the engine panels (very necessary) and then jump into the new horn (Hornblasters Sniper) install…. Followed by the new flag pole holders and sunshade…. Yes, I know… I tend to always have a few projects on the go….


Sent from my iPad using Tapatalk

[HFarr]

That's sort of an odd design.

Sent from my SM-G781V using Tapatalk

[Dukabor]

That's sort of an odd design.

Sent from my SM-G781V using Tapatalk

I agree…. Likely specifically designed to prevent us from doing what I wanted to do….. not that I am a tin foil hat wearer or anything lol

[KnoxMojo]

I agree…. Likely specifically designed to prevent us from doing what I wanted to do….. not that I am a tin foil hat wearer or anything lol

That's why I sold my mag swivels and used the basic Si 3 position swivel. You could always upgrade to PRM racks!

[RUGER761]

and then jump into the new horn (Hornblasters Sniper) install….


Sent from my iPad using Tapatalk

Be interested to see what you do on this one. I’ve been thinking about taking the horn apart and just leaving the cover on the outside then mounting a single air horn behind the hull to blow thru the factory hole. Factory horn isn’t loud enough for anyone to even hear it and sounds terrible


Sent from my iPhone using Tapatalk

[Dukabor]

Be interested to see what you do on this one. I’ve been thinking about taking the horn apart and just leaving the cover on the outside then mounting a single air horn behind the hull to blow thru the factory hole. Factory horn isn’t loud enough for anyone to even hear it and sounds terrible


Sent from my iPhone using Tapatalk

I have the same issues with the stock horn as you do…. If it was ever truly needed as a warning signal it would simply not suffice…. And bot the sound of it makes me feel like I want to crawl under the helm ha ha

https://hornblasters.com/en-ca/products/sniper-electric-horn

Thats the link to the sniper and you can get a sound demo, and the plan is to mount in the stock location, remove the stock horn and leave the cover on as you stated, though it may be a pain to get to…. My dealer tells me the horn gets direct power and does not run through the PDM, so hopefully I will get enough power suppled to just use the existing wires and stock horn button….

The sniper is pretty compact (see pic for reference and I feel it will fit there, if not, my secondary location is under the helm, in either spot it should be able to use the hull to deepen the tone a little and be able to truly serve its purpose as a warning….. a warning that the party has arrived !!

31036

[RUGER761]

Yep that’s pretty much the horn I was thinking of. I put one on my truck a year ago (works very well towing our toy hauler) and actually have a 2nd sitting on the shelf in the box as the zon messed up and sent me 2. Just haven’t taken the time to dive into it yet.


Sent from my iPhone using Tapatalk

[cucv]

I've been dreaming of this upgrade as well. I'm embarrassed to hit my horn as my FIL made fun of it on the 4th of July and the family loves to tell the story.

Sent from my SM-S911U using Tapatalk

[Dukabor]

I've been dreaming of this upgrade as well. I'm embarrassed to hit my horn as my FIL made fun of it on the 4th of July and the family loves to tell the story.

Sent from my SM-S911U using Tapatalk

This is good for me to hear I’m not the only one who feels that way about the stock horn….. I feel like this is a support group for that…. I will post pics of the journey along the way to recovery from horn inadequacy !!

[HFarr]

The horn conversation is funny! When we first demoed and bought our Moomba, my wife said that sure is a wimpy horn for such a big boat, and the salesman actually got sort of offended by it. But it is true, that factory horn sounds like something on a moped.

Sent from my SM-G781V using Tapatalk

[haknslash]

Nice to see some board racks on that boat Hak:)

Yessir all thanks to you. Boat looks much better with them and it gives me a place to stow the boards out of the lockers :)

[haknslash]

Wow. Those place really looks peaceful!

Sent from my SM-G781V using Tapatalk

It truly is. Only bad thing about that spot is the a amount of fish that lite to bite on you :D


Hope you were able to get some AM riding. Love the vacay days of riding first thing in the AM, heading back for breakfast, packing the cooler for the afternoon, and spending the rest of the day hanging on the lake.

Yup that is pretty much what we did all week. Wake up and get my coffee fix, head out on the boat and sometimes pack a lunch and other times just head in for lunch at the house and then head back out later. Can’t beat it!

[HFarr]

LOL on the fish bites! They don't call them titty brim for nothing. And if you are of the hairy nature, they will definitely pull at it on your legs and chest!

Sent from my SM-G781V using Tapatalk

[haknslash]

Going tomorrow to demo this SV with the fam. I have a buyer lined up for my Max so she might be coming home soon if all goes well on the big water!

https://i.imgur.com/9GW2lz5.jpeg

https://i.imgur.com/JZGk3B0.jpeg

[brad460]

Nice Hak- I saw you had your Max for sale. That Supra looks awesome!

[haknslash]

Thanks man it’s a really nice SV. It has almost all of the options I would have spec’d if I were custom building again. I’m having them quote what it would cost to buy the optional Flip-up sun pad seats from SC. It has the drop step too which was a must for me this time lol.

My dealer was out today giving her a shakedown to be ready for tomorrow. Interior looks pretty slick and I like the gatorstep to bring a little of the blue inside the boat.

https://i.imgur.com/T1YF8Dr.jpeg

https://i.imgur.com/RcDkRjb.jpeg

https://i.imgur.com/JWiY9kO.jpeg

[MustGoFast]

Testing a quick pick of the new boat I picked up today3103931038

[HFarr]

Man! Both of those are beautiful boats!!

Sent from my SM-G781V using Tapatalk

[RUGER761]

Had a great weekend, ready to get back out there, we even got to break out the ski.

https://uploads.tapatalk-cdn.com/20240623/4d6eb5fd0de6489ff729f1e6de2095b6.jpg

https://uploads.tapatalk-cdn.com/20240623/18a79f4161e203702fe4fd0bc4a2b016.jpg

https://uploads.tapatalk-cdn.com/20240624/9b7eb3c1b6deea8cfe60b75f8bd5f8f5.jpg


Sent from my iPhone using Tapatalk

[HFarr]

That sun in the background with the ski is frame worthy.

Sent from my SM-G781V using Tapatalk

[RUGER761]

That sun in the background with the ski is frame worthy.

Sent from my SM-G781V using Tapatalk

Yep that one came out great.


Sent from my iPhone using Tapatalk

[haknslash]

I miss having the physique to slalom ski. Used to love to hit the lake early in the morning to get that glass.

[RUGER761]

I miss having the physique to slalom ski. Used to love to hit the lake early in the morning to get that glass.

I’m not very good at it but sure is a lot of fun. Sometimes almost scares me going from 10 mph surfing to 32mph on the ski. Friday nights are our best glass times, plus no one is out there.


Sent from my iPhone using Tapatalk

[Beejwest]

New to me '22 Mojo - we love it so far after our first weekend out. 31040


*Edit - I also suck at posting pictures. They all get flipped.

[MJHSupra]

New to me '22 Mojo - we love it so far after our first weekend out. 31040


*Edit - I also suck at posting pictures. They all get flipped.

Nice colors.

[sandm]

I also suck at posting pictures. They all get flipped.

or do you really live in australia and not kansas city :)

nice boat. moomba built a great boat with the mojo for sure....

[Beejwest]

or do you really live in australia and not kansas city :)

nice boat. moomba built a great boat with the mojo for sure....

Ha! Trying tapatalk this time....https://uploads.tapatalk-cdn.com/20240625/f1ea2a9079151dce9a33b01347e8146c.jpg
https://uploads.tapatalk-cdn.com/20240625/8912762b9b79295b6cb9392c21605165.jpg


Sent from my iPhone using Tapatalk

[haknslash]

Nice and looks good!

[Beejwest]

Nice and looks good!

Thanks! Now I just have to dial in the wave. I'm reading the 50 page thread on the Flow and it's already upgraded to WM bags in the rear and about 800# of lead. It should just be a matter of me learning the system as it surfed great on our water test with the dealer driving. I just didn't catch where he had everything set and we only surfed for like 20 minutes last weekend for the first time. Wave felt kind of flat and lacked some push. It feels close to being great though!

[cucv]

Thanks! Now I just have to dial in the wave. I'm reading the 50 page thread on the Flow and it's already upgraded to WM bags in the rear and about 800# of lead. It should just be a matter of me learning the system as it surfed great on our water test with the dealer driving. I just didn't catch where he had everything set and we only surfed for like 20 minutes last weekend for the first time. Wave felt kind of flat and lacked some push. It feels close to being great though!Did you run autowake when you surfed on your own? It typically comes factory set at a pitch of 8 which I don't think is high enough. You can go into setting and increase it. I set mine at 9.5. Distribute your lead such that with all ballast full and your crew in their different seating configurations, the boat doesn't drop naturally below 9 degrees at surf speed you should be good. Surf speed around 11.5mph. If you switch sides often distribution lead so roll is close to zero on regular side which will make it easier for the boat to achieve 4+ degrees goofie side. Factor tab settings are pretty good at 60/70 regular/goofie. I find depending on conditions you can decrease these settings a bit and get more push. Center plate 0-25. Higher pitch setting definitely increases height and push but increases engine rpm and decreases visibility. If you regularly surf regular, you can shift lead to help increase negative roll for further fine tuning.

Sent from my SM-S911U using Tapatalk

[Beejwest]

Did you run autowake when you surfed on your own? It typically comes factory set at a pitch of 8 which I don't think is high enough. You can go into setting and increase it. I set mine at 9.5. Distribute your lead such that with all ballast full and your crew in their different seating configurations, the boat doesn't drop naturally below 9 degrees at surf speed you should be good. Surf speed around 11.5mph. If you switch sides often distribution lead so roll is close to zero on regular side which will make it easier for the boat to achieve 4+ degrees goofie side. Factor tab settings are pretty good at 60/70 regular/goofie. I find depending on conditions you can decrease these settings a bit and get more push. Center plate 0-25. Higher pitch setting definitely increases height and push but increases engine rpm and decreases visibility. If you regularly surf regular, you can shift lead to help increase negative roll for further fine tuning.

Sent from my SM-S911U using Tapatalk

Awesome! Thank you for this. I did not run AW, I was just tinkering around with stuff and never turned it on. When you say "negative roll" do you mean having a roll towards starboard when at rest while set up for regular?

[Swervy]

https://uploads.tapatalk-cdn.com/20240626/16276ef98e9bef22ae958c40f507a747.jpg
Not a bad night for a cruise


Sent from my iPhone using Tapatalk

[MJHSupra]

Nice photo!

[haknslash]

Ditto! Real nice one :)

[cucv]

Awesome! Thank you for this. I did not run AW, I was just tinkering around with stuff and never turned it on. When you say "negative roll" do you mean having a roll towards starboard when at rest while set up for regular?Yes, negative roll is towards starboard.

Sent from my SM-S911U using Tapatalk

[RUGER761]

That’s a cool pic!


Sent from my iPhone using Tapatalk

[bergermaister]

Started our year with a different kind of boating. A week on this little thing to celebrate my daughter's college graduation.

https://i.imgur.com/fXwhiCl.jpg

Almost 4 football fields long, 18 stories high. Our first cruise - it was like walking into a combination of a mall and amusement park. And this beast cruises at 24mph! We were on the 9th floor midship. So basically right in the middle of everything.

https://i.imgur.com/Ryjegrs.jpg

Then back to reality. Trying to get a new alternator in before our first "real" trip of the year. They make it so easy to get to... Then there's the poor timing on my part. $230 worth of parts and paying $200 for express shipping to make sure we're ready to go... :mad:

https://i.imgur.com/AHUlnjZ.jpg

[996scott]

haha, head first down into the deep recesses of my boat seams to be the story of my life as well! Great picture!

[MJHSupra]

It always appears to me those boats are too top-heavy.

[HFarr]

Started our year with a different kind of boating. A week on this little thing to celebrate my daughter's college graduation.

https://i.imgur.com/fXwhiCl.jpg

Almost 4 football fields long, 18 stories high. Our first cruise - it was like walking into a combination of a mall and amusement park. And this beast cruises at 24mph! We were on the 9th floor midship. So basically right in the middle of everything.

https://i.imgur.com/Ryjegrs.jpg

Then back to reality. Trying to get a new alternator in before our first "real" trip of the year. They make it so easy to get to... Then there's the poor timing on my part. $230 worth of parts and paying $200 for express shipping to make sure we're ready to go... :mad:

https://i.imgur.com/AHUlnjZ.jpg"One beer to settle you enough to go in head first, and then one more to relax when you come out". Been there!

Sent from my SM-G781V using Tapatalk

[sandm]

It always appears to me those boats are too top-heavy.

agreed!! I have always wondered how you can have 20 stories of crap and seems that the boat is only a few stories underwater.
physics was never my best subject in school tho.....

[bergermaister]

agreed!! I have always wondered how you can have 20 stories of crap and seems that the boat is only a few stories underwater.
physics was never my best subject in school tho.....

40ft of draft if I recall. Pulling into the virgin islands we kicked up an awful lot of sand with the side thrusters as they were navigating in to port. But yea, pretty crazy. Even at that big you could feel it swaying a little - when you were in the bathroom the towels would swing on the bars. And the pools on the upper decks sloshed back and forth a little. But I think that could have been from the wind vs waves.

[bergermaister]

After fighting the alternator in, removing the water pump twice, new belt, etc. I go to hit the key,,, click-click-click. Sweet.

Thankfully, rather than dropping a crap ton more $$ on more express shipping for a new starter, a mid 90's Chevy C1500 is a direct replacement. For anyone who happens to have one of these Indmar Assaults still.

https://i.imgur.com/6L5C0Nq.jpg

My daughter had fun "helping" me get everything buttoned up.

https://i.imgur.com/OcX3xbG.jpg

Sure is nice having a shop with room to spare when the weather turns and the unforecasted rain pays a visit.

https://i.imgur.com/RtAkH15.jpg

https://i.imgur.com/8rgMgWH.jpg

Later this week I might actually get out on the water and be able to contribute actual boating pics to this thread. LOL

[HFarr]

Man that shop looks like the tunnel under the English Channel!!!! Sooo much room!

Sent from my SM-G781V using Tapatalk