LED light location- Max

[brad460]

Curious where folks are mounting/sticking their LED light strips…specifically in the area in the pictures below. You can see the plastic interior piece only goes up so far- Are people sticking the LED strips along the top of that plastic interior piece? Or going up inside and mounting to the fiberglass?

My concern mounting along the top of the plastic piece is the LED strips will be somewhat exposed..

Thoughts?

https://uploads.tapatalk-cdn.com/20240505/fa9f5b517550196ba56fd10a72fc401e.jpg


https://uploads.tapatalk-cdn.com/20240505/362db1cf434a142929c7c7e15c09f84f.jpg


Sent from my iPad using Tapatalk

[Bmac]

I mounted led strips long that top plastic piece and would do it there again. I used a black background LED strip and honestly know one ever noticed it unless I pointed it out. I feel like you get more light by putting it there versus up in the fiberglass.


Sent from my iPhone using Tapatalk

[MLA]

Mount it to the backside of the combing pad.

[brad460]

I mounted led strips long that top plastic piece and would do it there again. I used a black background LED strip and honestly know one ever noticed it unless I pointed it out. I feel like you get more light by putting it there versus up in the fiberglass.


Sent from my iPhone using Tapatalk

Unless you look up from the floor level you can’t really see the top of the black plastic, so this should be ok. Thanks for the feedback..

[brad460]

Mount it to the backside of the combing pad.

Is this where you mounted yours? I feel like the LED strips might not stay stuck to the fiberglass..thoughts?

[MLA]

Is this where you mounted yours? I feel like the LED strips might not stay stuck to the fiberglass..thoughts?

Ive done MANY like I suggested but ive never relied on the thin adhesive backing to secure the strip. Zip ties with an anchor hole and a #6 x 1/2 SS wood screw.

[haknslash]

I secured mine out of sight along the wire loom and other things you can zip tie the strips to.

https://i.imgur.com/jginoHU.jpeg

https://i.imgur.com/3ABSojf.jpeg

https://i.imgur.com/wxRBrxG.jpeg