Add newer tower camera to 2018 SE

[cal1319]

Is it possible to update the tower camera on a 2018 SE 450 with the newer camera that is not as affected by the Bimini? I don’t know if it is possible or if you can even buy one. Thanks!


Sent from my iPhone using Tapatalk

[larry_arizona]

Is it possible to update the tower camera on a 2018 SE 450 with the newer camera that is not as affected by the Bimini? I don’t know if it is possible or if you can even buy one. Thanks!


Sent from my iPhone using Tapatalk

The 2019+ fx one tower cameras have a spacer block that clears the Bimini, your dealer should be able to source the spacer for you.


Sent from my iPhone using Tapatalk

[cal1319]

Awesome… thank you for the reply. I will reach out to the dealer and see if they can help!


Sent from my iPhone using Tapatalk

[SONIC]

The 2019+ fx one tower cameras have a spacer block that clears the Bimini, your dealer should be able to source the spacer for you.


Sent from my iPhone using Tapatalk

Not really. Needs to be an inch or two higher IMO I still see the Bimini in the tower camera on my 2020

[cal1319]

Well right now with the Bimini is about 50% if the screen… if it’s better then that it might be worth while haha


Sent from my iPhone using Tapatalk

[HFarr]

Sounds like a job for someone with a 3d printer!

Sent from my SM-G781V using Tapatalk

[cal1319]

I haven’t had a chance to dig into the tower camera yet but I gather it’s relatively easy to remove it? If so getting making a new mount might make sense


Sent from my iPhone using Tapatalk