Jabsco Ballast Puppy Reversible Pump

[ghebert1111]

Ayone ever rebuild one of these? One of mine is getting power but the shaft the green impeller is on is not spinning. I have removed it from the boat but haven't started taking it apart yet.

[larry_arizona]

Any debris blocking impeller? I would see if you can try and break it free with a pair of pliers.


Sent from my iPhone using Tapatalk

[ghebert1111]

Any debris blocking impeller? I would see if you can try and break it free with a pair of pliers.


Sent from my iPhone using Tapatalk

The shaft spins by hand, just not when plugged in and getting power applied to it.

[Holdmybeer]

The windings are shot. Not worth rebuilding. New one is $200, and I never have seen a rebuild kit for the motor.

[ghebert1111]

The windings are shot. Not worth rebuilding. New one is $200, and I never have seen a rebuild kit for the motor.

Where are they 200? I'm seeing 270 on wakemakers.

https://www.wakemakers.com/products/jabsco-ballast-puppy-wakeboard-pump

[ghebert1111]

or this one.

https://www.wakemakers.com/products/jabsco-ballast-puppy-oem-pump?gclid=CjwKCAjw1MajBhAcEiwAagW9MakqNrmf23csGJj I3d2EJ9VA7tLQUGB2Ij4voDxdySVPfYR3MJKUcRoCs-IQAvD_BwE

[Holdmybeer]

Actually I am wrong here. The replacement pump is a Jabsco Puppy 18670 series - 8-9 GPM. They are $385 and discontinued.

Wakemakers is selling you a 18220 series which is 9gpm at $250 and the replacement version.
https://www.wakemakers.com/products/jabsco-ballast-puppy-oem-pump?gclid=CjwKCAjw1MajBhAcEiwAagW9MYJl85VNTAA8uob cSWwqHt25hfLAg2yy8Zc057ukmcDINBCyNT-_gBoCp3sQAvD_BwE

$185 gets you the 18660 version which is 6.3gpm from the website below.
https://www.hodgesmarine.com/jab18660-0121-jabsco-12v-water-puppy.html?gclid=CjwKCAjw1MajBhAcEiwAagW9MTMUlF0tt Mc5OD5rKPUEFQlyhfUlBp75ZE70KHiGX_v0AVUADfOhtRoCQlU QAvD_BwE