View Full Version : Ballast tubing size
TOYMCHN
08-12-2022, 09:13 AM
Looking to do some work to raising the ballast sensors after replacing my rear bags with the WM upgraded bags. Wondering if the stock tubing size is 1-1/8?
Sorry if this info is out there already, I tried googling and did a few searches on here.
TXSurf4
08-12-2022, 12:40 PM
Looking to do some work to raising the ballast sensors after replacing my rear bags with the WM upgraded bags. Wondering if the stock tubing size is 1-1/8?
Sorry if this info is out there already, I tried googling and did a few searches on here.
It is 1" tubing.
TOYMCHN
08-13-2022, 08:23 AM
Thank you sir!
TXSurf4
08-13-2022, 06:42 PM
Thank you sir!
No problem. Just so you know you will need a heat gun to get the hose on the fittings. So just make sure you have one before you start your project.
Sent from my iPhone using Tapatalk
TOYMCHN
08-14-2022, 06:33 PM
I do indeed have a heat gun ready to go. Thanks again
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.