PDA

View Full Version : 2008 Moomba LSV how to unplug the Moomba Cruise



Jim5506
05-23-2022, 03:51 PM
Greetings,
2008 Moomba LSV crusie control stuck at 2900 rpm.
Kicks in about 30 secs into ride.
Can't find how to disconnect, I don't need the crusie control.

Anyone know how to disconnect in engine compartment?

mmandley
05-23-2022, 04:40 PM
Have you tried disconnecting the battery over night to see if it will clear it from memory?

Id assume the wires goto the ECM of the boat.

Jim5506
05-24-2022, 10:27 PM
Have you tried disconnecting the battery over night to see if it will clear it from memory?

Id assume the wires goto the ECM of the boat.


YES. Still stuck at 2900rpm. It will go faster at startup; then cruise kicks in after 30 seconds. Anyone have a picture of disconnecting in engine compartment? I cannot get under dash.... tried many times.

Jim5506
05-24-2022, 10:30 PM
Attached are pics of engine compartment. Where is cruise actuator?