Tower light housing.

[KelleyTinting]

Busted the tower light and grey housing 2016 Moomba Craz. Can find the light but not the housing. Any help appreciated!

[996scott]

Are you talking about black plastic part?

https://www.amazon.com/Attwood-5580A7-Tower-All-Round-Light/dp/B00K8DBIUK/ref=asc_df_B00K8DBIUK/?tag=hyprod-20&linkCode=df0&hvadid=312094677816&hvpos=&hvnetw=g&hvrand=2329309256946666136&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9052441&hvtargid=pla-491304439387&psc=1

[Holdmybeer]

The Attwood part Scott posted is the whole unit.
Been there....garage door wasn't open enough. 2 Phillips screws and 2 wires all is better.

The light is a twist lock into the base.

[996scott]

Haha, me too! I only have about 1 inch of clearance from the tower light (when the tower is all the way down) to the top of the garage. Went a little to fast once and broke it.:mad:

[Mxmark4]

Mine was broken when I bought the boat. I literally just fixed it yesterday. Had to tap out the holes to a larger screw but its finally all back together. Now I just have to clean the adhesive off it from the black tape that was holding it up.

[KelleyTinting]

Not the black plastic housing of the light. I broke the grey housing that mounts to the tower.

[HFarr]

Post a picture

Sent from my SM-G781V using Tapatalk

[Holdmybeer]

Definitely need a picture.
If I went any lower I would have grabbed the tower and broke the garage door. Further down on mine is metal.

[KelleyTinting]

30290

See the silver part the light bolts too?

[KelleyTinting]

First time adding pics. I will learn. lol