View Full Version : Adding Subwoofer to a 2020 Moomba Makai
nchristie61
04-27-2022, 10:48 PM
Hello all, new to the group/forum but I am looking for some assistance. I am about to purchase a 12” subwoofer in a enclosed/ported box. It will be on its own 1200 watt mono block amp. Would anyone have a step by step process of how to add it to the stock Wet Sounds system in the 2020 Makai? We have the two 10” tower speakers and the open air sub under the driver console. I would really like to do this myself, and not have to take it to a audio shop. Thanks in advance!! 👍🏼
HFarr
04-27-2022, 11:09 PM
I can't really help you with that, but I'm sure someone on here will. I want a report on how it sounds when you get it installed!
Sent from my SM-G781V using Tapatalk
vdubnick
05-03-2022, 02:53 PM
just get RCA Y-adapter for the signal, and tap into the remote turn on from the existing sub amp... pretty straight forward. since you have the factory amp setup, there should be terminal blocks and room on the amp board to mount and run wires.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.