'22 Mojo Registration Number Advice

[uniwarking]

Hey all. I'm looking for some advice for registration numbers on our 2022 Mojo. On our 2013 Mojo, we used chrome domed letters (I forget exactly where I bought them). I'm thinking to contrast the black metal flake gelcoat, I'd like to match our intense green (since we don't have chrome Moomba logos on the boat). I'll probably place this below the rub rail but it would also work above.

I see there is an option at domednumbers.com, offering the Moomba font and "intense green" for $79.99 shipped. There is also an option at doimedlettering.com offering Masque (Moomba) font and Green or Lime Green (not sure which is closer to Intense Green) for $98.61 shipped. I'm not sure which of these is a better product... I think I used domedlettering last time but not 100% sure.


Boat Profile Photo:
30158

DomedLettering Render:
30159

I also saw the option to "outline" the domednumbers option in black metal flake which might be cool.

The other thing I'll need to do is get an occupancy number to go on the right side near the stern per Iowa law. Since this will go on the intense green I'll probably need to go with black or black metal flake.

Thanks!

[Holdmybeer]

Doomednumbers.com can match the Black Flake and the intense green.

I would do BMF outlined in intense green for both.
Go under the rail....plenty of room

Just my $0.02....awesome boat

[larry_arizona]

Full green under rail to pull some green to the front of the boat.


Sent from my iPhone using Tapatalk

[HFarr]

I put my domed black metal flake under my rub rail.https://uploads.tapatalk-cdn.com/20220221/ced984e66272077ff8a3835f922ce0f2.jpghttps://uploads.tapatalk-cdn.com/20220221/0f2c3d7c14daf9dbe0063f40b0cbbb5e.jpg

Sent from my SM-G781V using Tapatalk

[uniwarking]

I think I've settled on domednumbers.com and solid intense green for the registration numbers. I'm going to see if they can do a black "17" as well for my occupancy number as the boat is intense green at the stern. Thanks for the advice all!

Does anyone happen to know if they offer a discount code?

[uniwarking]

Got my numbers installed today!
https://uploads.tapatalk-cdn.com/20220306/087fe5a1d6117edfcf9f9ba814999b00.jpg
Thanks for the advice!


Sent from my iPhone using Tapatalk

[HFarr]

Sharp looking!

Sent from my SM-G781V using Tapatalk

[WildH]

I put my domed black metal flake under my rub rail.https://uploads.tapatalk-cdn.com/20220221/ced984e66272077ff8a3835f922ce0f2.jpghttps://uploads.tapatalk-cdn.com/20220221/0f2c3d7c14daf9dbe0063f40b0cbbb5e.jpg

Sent from my SM-G781V using Tapatalk

I'm wondering if the distance between that vent and the crease on the kaiyen is the same as your Makai. I like the idea of below the rail but not a lot of room to spare there.

[Mxmark4]

When I replaced my numbers recently I did them below the rail as thats where the previous ones were. However I did port side first and then realized the vent on the starboard side threw them off from being even. So I had to redo the port side numbers and move them forward to make it match even though you cant see both sets of numbers at the same time.

https://i.ibb.co/84dwCV8/20220225-220726.jpg

[RUGER761]

Wish I could have put ours under the rail, but they wouldn't fit :(and in OK they will stop you if there's not enough space between the sets of numbers/letters. SC needs to move the horn back about 4" on the Makai.

The green looks sharp!!

[Mxmark4]

We are supposed to have spaces between the numbers also, but I had to move them closer to make it fit. Hoping they dont bother me.

[HFarr]

Funny you mentioned the horn. I thought the same thing when I was putting my registration on. They could just as easily put it up top just in front of the windshield and hidden it.

Sent from my SM-G781V using Tapatalk