6.2L raptor 400 oil pressure

[eder10986]

Just wondering what’s normal?

I’m at 38-41 on idle and close to 70 fully loaded at 3.5k rpms.

Thanks!


Sent from my iPhone using Tapatalk

[BigOrange]

You are normal at those levels.

[eder10986]

You are normal at those levels.

Thanks! Always like to double check as these are my first times servicing a raptor.


Sent from my iPhone using Tapatalk

[Holdmybeer]

My rule of thumb is oil pressure should be double the RPM's first 2 digits. If it is more that is fine to a point, anything over 100psi you probably have a clogged passage way, wrong viscosity oil, or really cold and should have a block heater.

Example:
1000 RPM = 20psi oil pressure
2500 RPM = 50psi Oil pressure
3500 RPM = 70psi oil pressure

[eder10986]

My rule of thumb is oil pressure should be double the RPM's first 2 digits. If it is more that is fine to a point, anything over 100psi you probably have a clogged passage way, wrong viscosity oil, or really cold and should have a block heater.

Example:
1000 RPM = 20psi oil pressure
2500 RPM = 50psi Oil pressure
3500 RPM = 70psi oil pressure

This is awesome Info. Thanks!


Sent from my iPhone using Tapatalk

[larry_arizona]

Just wondering what’s normal?

I’m at 38-41 on idle and close to 70 fully loaded at 3.5k rpms.

Thanks!


Sent from my iPhone using Tapatalk

Idle 36
Fully Surf loaded 11 mph 3300 rpm 55


Sent from my iPhone using Tapatalk