Rear locker trays moomba Mojo 2021

[Emilware]

Has any one of you had an issue ordering rear locker trays for your 2021 Moomba mojo?
Unfortunately I did not select that option during the build therefore I had to place an order with my dealer. A week after I placed an order they informed me that Moombah does not make trays for the rear lockers for mojo.
And that there is a mistake in the ordering system.

As you can imagine I went back to the website where the option is still available and there is even an image.
Day later I get a call with apologies from SC they also confirmed that I will have my trays next week.


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

I'm not ordering the trays since the bags will get upgraded at some point

Sent from my Note9 using Tapatalk

[sleek98]

I have the rear bins in my 2021 Mojo. I ordered it with my original build though.

[Emilware]

I have the rear bins in my 2021 Mojo. I ordered it with my original build though.

sleek98 would you mind telling me how deep they are and perhaps taking a picture of it?
Also, are you happy with the size and the depth?


Sent from my iPhone using Tapatalk

[sleek98]

I am 2.5 hours away from my boat but they are like 11-12” deep. They are useful for ropes and such but don’t fit a jacket unless you fold it in half. Im 50/50 on pulling them out and re doing my ballast bag setup over the winter.

I carry a ton of extra weight due to it just being my wife abs two small kids 90% of the time. I have the measurement for the custom rear bags where you will have to pull the bins.

[Emilware]

11 -12 inches should be plenty deep for life jackets. That is the main reason why I’m getting them. I need a place to put my wet life jacket as soon as I get out of the water.
My old Tige had a huge locker in the back for things like that a d I would hate not having it here.
Any suggestions?


Sent from my iPhone using Tapatalk

[sleek98]

They not very wide. I want to say 14-16” wide. So a jacket won’t lay flat there. The tray over the motor is wide enough for a jacket to lay flat but is only deep enough for 1 Costco jacket or 2 of our comp vests. Plus side is it heats it up in the cooler months.

[HFarr]

Mojo bins must be smaller than the ones in my Makai. We put 2-3 life jackets and ski ropes in one side, and I have an anchor, rope and 2 more jackets in other side. I will measure them tomorrow. I hardly ever put anything in the middle bin over engine because it's just enough of a pain to get to with having to open both side compartments first.

Sent from my moto z4 using Tapatalk

[Emilware]

sleek98 HFarr I think the only way to settled this one is with some pics.

I do agree that over the engine tray is a pain to use. I only intent to use it for ropes because we only get them out once


Sent from my iPhone using Tapatalk

[HFarr]

Had 3 vests, anchor and 100' of rope in one sidehttps://uploads.tapatalk-cdn.com/20210717/bc4096628ac9f0164bb62f4834b8b136.jpghttps://uploads.tapatalk-cdn.com/20210717/4e36ca766f771afb889b4a3b8c622ce5.jpghttps://uploads.tapatalk-cdn.com/20210717/e7c4c61fd43d656ae52f9acecb58c7d2.jpg

Sent from my moto z4 using Tapatalk

[HFarr]

11 deep,. 17 wide, 33 longhttps://uploads.tapatalk-cdn.com/20210717/b875a034daa1a7fbf8711c4ae7df5828.jpghttps://uploads.tapatalk-cdn.com/20210717/a8406ed98ca00d6cde58e1dd32a84dbe.jpghttps://uploads.tapatalk-cdn.com/20210717/934db151fd6415f478121b64386a4794.jpg

Sent from my moto z4 using Tapatalk

[Emilware]

Thank you HFarr . They look awesome! Sounds like a winner to me.


Sent from my iPhone using Tapatalk

[Buckeye]

Instead of the bins, I am actually putting bungee cargo netting in the lockers. My thought process is that: 1) they are soft and will flex up when ballasts are full if needed 2) makes a nice space for wet life jackets and 3) if life jackets are in there, it will potentially serve to help dampen engine noise.

[Jason1975]

agree with above. I have seen the cargo nets used effectively. They are like $9 at harbor freight. you just have to drill and install some small hooks to hang them on. that's what i plan to do on my mondo

[Emilware]

I just installed one of the $9 60lbs cargo nets. They get the job done and do flex with the ballast. But to be honest I’m just worried about snagging life jackets buckles and stuff.


Sent from my iPhone using Tapatalk

[Buckeye]

Maybe you could find a finer weave that would not let the buckles fit through. Interesting point though.

[TXSurf4]

Did anyone ever measure the Bins on a Mojo? I have mine I pulled out of my Makai and I never plan to use them again so if I can sell them that would be awesome! They are standard on the Makai so I would likely only be able to sell them if they are the same size as the Mojo as they are a $700 option on it.

[HFarr]

Maybe you could find a finer weave that would not let the buckles fit through. Interesting point though.Maybe cut and zip tie a mesh laundry bag on top of the net.

Sent from my moto z4 using Tapatalk

[RC_Hinojosa]

Maybe cut and zip tie a mesh laundry bag on top of the net.

Sent from my moto z4 using TapatalkOr just zip & buckle the jacket....

Sent from my Note9 using Tapatalk

[Emilware]

Or just zip & buckle the jacket....

Sent from my Note9 using Tapatalk

Right now I’m just throwing the life jackets with buckles up. I’ll take some picks of it tomorrow.


Sent from my iPhone using Tapatalk