PDA

View Full Version : Blower NOT working



terryleonard2000
07-06-2021, 08:17 PM
Blower not working on a 2017 Moomba Mojo Pro..where to start?

MJHSupra
07-06-2021, 09:38 PM
Fuse to start.

Multi Meter at the blower to see if you are getting power when the switch is on.


Sent from my iPhone using Tapatalk

tpjsooner
04-03-2022, 10:27 AM
I have a 2015 Mojo. The blower is t turning on and neither is the light on the blower switch.

Questions:

1. I’m assuming that with the switch light not coming on that it must be power to the switch and then also to the blower motor, since neither are working.

2. Ive checked:
- blower fuse / amp under dash and reset and pulled and reinserted. Still nothing.

- reset breakers by batteries and in engine compartment. Is there any other fuse, amp, or breaker to check?

- pulled and reconnected the wires on the switch below the dash. Is there anything else I should check before getting a voltmeter/multimeter to check current flow.


3. If the blower fan isn’t working and is the problem, would that prevent the light on the dash coming on?

HFarr
04-03-2022, 10:39 AM
Make sure there is not a reset button on the actual blower motor itself.

Sent from my SM-G781V using Tapatalk

tpjsooner
04-03-2022, 10:43 AM
Okay. It’s an Attwood 3” or 4” blower. Any idea if they have a reset switch?

Thoughts on the blower light and blower not working, though?

HFarr
04-03-2022, 10:52 AM
If the switch light is not working , I would be suspect of a bad switch or no power to it. Best bet is to put a multimeter or 12 v test light on it to make sure power is there.

Sent from my SM-G781V using Tapatalk

Holdmybeer
04-03-2022, 08:10 PM
No reset on the Attwood blower.
Check 12V at the switch. 1 leg will be constant 12v the other will change based on switch position. If no output switches bad. No input follow it to the fuse box. The fan is cheap but inventory will be the battle.