klonteig
06-22-2021, 10:21 PM
Hey Everyone,
New member here and just joined the Supra club on the weekend with a 2009 Sunsport 24V. As I'm getting to know the boat, I had a question around the trim plate operation. I have a single trim plate, controllable from the cockpit. It was hard to notice the difference in position when we had it out for the first time on Sunday (and I was getting a lot of cavitation at slower speeds), and so troubleshooting yesterday, I noticed it only moves maybe 1-1/2" at most. I believe it is in the full up position with only a minimal downward deflection. Was hoping someone could validate what I should be seeing (I was expecting a lot more), and maybe point out what I might look at to solve it.
Alreadly learned a bunch reading through some posts, but couldn't find anything specific to this.
Thanks for the help in advance.
New member here and just joined the Supra club on the weekend with a 2009 Sunsport 24V. As I'm getting to know the boat, I had a question around the trim plate operation. I have a single trim plate, controllable from the cockpit. It was hard to notice the difference in position when we had it out for the first time on Sunday (and I was getting a lot of cavitation at slower speeds), and so troubleshooting yesterday, I noticed it only moves maybe 1-1/2" at most. I believe it is in the full up position with only a minimal downward deflection. Was hoping someone could validate what I should be seeing (I was expecting a lot more), and maybe point out what I might look at to solve it.
Alreadly learned a bunch reading through some posts, but couldn't find anything specific to this.
Thanks for the help in advance.