2015 Moomba Mondo, depth finder not reading

[bealaddison]

The depth finder on my 2015 Moomba Mondo either reads 999 or - - -. Could it be an issue with the transducer? I have pulled in and cleaned the face of and debris. Checked connections. Is it time for a new transducer?


Sent from my iPhone using Tapatalk

[tpjsooner]

I’m having the same issues with my 2015 Mojo. Did you find a solution? Where is the depth finder located? I got underneath the boat the best I could and couldn’t find it.

[Holdmybeer]

There is a triducer. It reads depth, and water temp. More than likely it finally died.

I am waiting for the same thing to happen. If you lift the v-drive cover and look around toward the gas tank, oppisite of the bilge pump you will find it.

[tpjsooner]

How difficult is the replacement?

[bealaddison]

How difficult is the replacement?

I changed mine and all is good now. There is an updated part number. This was the one for my ‘15 Moomba.

Sld S/O Lay 1 0 0
P/U Part Number 0 SC117395P
Description
PADDLE WHEEL, CAN TRI-DUCER
Subtotal Special Handling Sales Tax Invoice Total
Total Amount Due
DISCOVER, MASTERCARD, VISA & AMEX
Price
$484.62

Replacement is very easy and can be done in the water. Simply unplug the old unit, unscrew the collar and pull it out. There is a semi check valve in the housing that slows the water flow. Check the new unit for correct o-rings, grease the o-rings, install the new unit in the correct orientation for the paddle wheel. Connect the new unit.

https://uploads.tapatalk-cdn.com/20220628/17b567c2f84e95269e8523278c380f6c.jpg


https://uploads.tapatalk-cdn.com/20220628/252ee7c91743dcc78888804adc3543b2.jpg


Sent from my iPhone using Tapatalk