Flag pole Bimini extender (Dream stage)

[Josh828]

Been a lot of discussion lately about extending the Bimini. Will admit last Sunday I tied up with two friends and we didn't move for almost 6 hours. (Thanks LetTieUp bumpers and @sandm for the box anchor)
While sitting out things got hot. Real hot. Was thinking how nice some extra shade would be when parked. Few beers later and topic got brought up about adding a flag to the boat. Now here is where it comes together, Two flag pole holders. Angle them at a 45* with a 6-10' pole with a shade cloth between the two.
Breaking it down, we have three main components the flag pole holders, the poles themselves, the fabric.

Flag pole holders- Looks like the Big Air 360* is the best and only real choice out there. Just watched their video and looks like they pulled 50lbs and the mount didn't budge. So the plan would be install two of these near the top of the tower so when angled backwards 45*-60* to provide canopy it would compliment the existing Bimini. Hoping they will be strong enough to hold.
https://images-na.ssl-images-amazon.com/images/I/61rQi89KN8L._AC_SL1500_.jpg

Poles- The big air mounts looks like they can handle a 7/8" pole.
So I'm thinking either a wooden dowel rod? 3/4" pvc (outside diameter is right at 7/8") or even trying to find an aluminum rod. I am completely at a loss for the pole so any suggestions welcome. Also maximum length y'all think this rig could handle before collapse
Just tested out a piece of 3/4" metal conduit EMT, and easily put 40lbs on it with no bending hardly at all. Pvc moved a great deal however the sag wouldn't be the worst thing either..

Fabric- Thinking of a mesh or other super lightweight but shading fabric, I think if the wind could come through it great. Looked at some SPF fabrics as well. Sewing two sleeves in each side to slide the poles into. Really once done the poles and fabric could be rolled up and stored. Unroll slide poles into holders and done.

Below is a great shop approved drawing. Let me know what y'all think, anyone ever tried this? Anyone with a flag holder who can say?
Step 1 will be buy the flag pole holders, Find an appropriate rod. Then lastly the fabric.
https://uploads.tapatalk-cdn.com/20210525/4b40337d6371feb62bb361bfb5e7f6aa.jpg

[Holdmybeer]

Posted to save.
Looking to see how all this works, as my wife and kids were complaining last weekend about the engine sunpad being too hot to lay on.

Something like this might work. 1ft sections, build as big as you want.

https://www.walmart.com/ip/HSS-12-Extension-Pole-7-8-pole-diameter-1-2-mm-pole-thickness-Black-4-PACK/121285042

[RC_Hinojosa]

Been a lot of discussion lately about extending the Bimini. Will admit last Sunday I tied up with two friends and we didn't move for almost 6 hours. (Thanks LetTieUp bumpers and @sandm for the box anchor)
While sitting out things got hot. Real hot. Was thinking how nice some extra shade would be when parked. Few beers later and topic got brought up about adding a flag to the boat. Now here is where it comes together, Two flag pole holders. Angle them at a 45* with a 6-10' pole with a shade cloth between the two.
Breaking it down, we have three main components the flag pole holders, the poles themselves, the fabric.

Flag pole holders- Looks like the Big Air 360* is the best and only real choice out there. Just watched their video and looks like they pulled 50lbs and the mount didn't budge. So the plan would be install two of these near the top of the tower so when angled backwards 45*-60* to provide canopy it would compliment the existing Bimini. Hoping they will be strong enough to hold.
https://images-na.ssl-images-amazon.com/images/I/61rQi89KN8L._AC_SL1500_.jpg

Poles- The big air mounts looks like they can handle a 7/8" pole.
So I'm thinking either a wooden dowel rod? 3/4" pvc (outside diameter is right at 7/8") or even trying to find an aluminum rod. I am completely at a loss for the pole so any suggestions welcome. Also maximum length y'all think this rig could handle before collapse
Just tested out a piece of 3/4" metal conduit EMT, and easily put 40lbs on it with no bending hardly at all. Pvc moved a great deal however the sag wouldn't be the worst thing either..

Fabric- Thinking of a mesh or other super lightweight but shading fabric, I think if the wind could come through it great. Looked at some SPF fabrics as well. Sewing two sleeves in each side to slide the poles into. Really once done the poles and fabric could be rolled up and stored. Unroll slide poles into holders and done.

Below is a great shop approved drawing. Let me know what y'all think, anyone ever tried this? Anyone with a flag holder who can say?
Step 1 will be buy the flag pole holders, Find an appropriate rod. Then lastly the fabric.
https://uploads.tapatalk-cdn.com/20210525/4b40337d6371feb62bb361bfb5e7f6aa.jpgDo it!! Looks like a sound idea!

Sent from my SM-N960U using Tapatalk

[sandm]

it's almost exactly what nautty uses on the paragon for extended sunshade.
fiberglas poles in the back corners go up to sunbrella that is attached to the back of the bimini.
nautty are using some recessed holes that the 'glas poles go into that are super slick but likely a couple bills each.

https://www.premierboating.com/wp-content/gallery/2021-nautique-g25-paragon-mock-build/2021-Nautique-G25-Paragon-Wake-Boat-Extended-Sunshades.jpg

[sandm]

should note this has been discussed on a different forum and iirc couple manufacturers are making them on a custom order basis in the $800=1k range and using actual bimini material.

[Holdmybeer]

Re-read the Big Air flag mount description.
They use a 7/8" pole with rubber coating. The hole is more likely 1-1/8" or 1-1/4". So you open the possibilities of being able to run telescoping poles.

[Josh828]

should note this has been discussed on a different forum and iirc couple manufacturers are making them on a custom order basis in the $800=1k range and using actual bimini material.

Yeah the paragon is where this all started and I remember seeing it discussed however every time it ended with $1000 options. My goal is about $400 all in. Considering $200 is just the flag pole mounts and ill probably just rob the rods from our shop.

I also thought about tent poles like the paragon but this idea would have the only mounting point at the tower and Because drilling basically fishing pole holders into my 2021 wake boat just seems painful haha
It will also raise the height towards the back of the boat so maybe I can adjust it where you can walk out onto the swim deck without hitting your head

Disclaimer I think I will be lucky to shade the sitting area. I believe the rear sun pad and swim deck will unfortunately be exposed still..

But since no notable "no you are an idiot this will not work" has been said I'm going to go ahead and order the flag pole mounts today. Anyone know if BigAir offers any discount? Also gotta measure my A3 tower for the diameter...

[Holdmybeer]

Yeah the paragon is where this all started and I remember seeing it discussed however every time it ended with $1000 options. My goal is about $400 all in. Considering $200 is just the flag pole mounts and ill probably just rob the rods from our shop.

I also thought about tent poles like the paragon but this idea would have the only mounting point at the tower and Because drilling basically fishing pole holders into my 2021 wake boat just seems painful haha
It will also raise the height towards the back of the boat so maybe I can adjust it where you can walk out onto the swim deck without hitting your head

Disclaimer I think I will be lucky to shade the sitting area. I believe the rear sun pad and swim deck will unfortunately be exposed still..

But since no notable "no you are an idiot this will not work" has been said I'm going to go ahead and order the flag pole mounts today. Anyone know if BigAir offers any discount? Also gotta measure my A3 tower for the diameter...

Just use fishing rod mounts.
Most come power coated already and they are much stronger and offer 1-1/2" OD mounts. Much stronger rod and you can telescope to maybe cover some of the sun pad. Also way more cost friendly then the big air mounts

[SONIC]

Or something like this so you can change the angle easily as the sun changes position :D
https://www.amazon.com/MonkeyJack-Swivel-Adjustable-Antenna-Ratchet/dp/B0774J9TXV

[RC_Hinojosa]

Yeah the paragon is where this all started and I remember seeing it discussed however every time it ended with $1000 options. My goal is about $400 all in. Considering $200 is just the flag pole mounts and ill probably just rob the rods from our shop.

I also thought about tent poles like the paragon but this idea would have the only mounting point at the tower and Because drilling basically fishing pole holders into my 2021 wake boat just seems painful haha
It will also raise the height towards the back of the boat so maybe I can adjust it where you can walk out onto the swim deck without hitting your head

Disclaimer I think I will be lucky to shade the sitting area. I believe the rear sun pad and swim deck will unfortunately be exposed still..

But since no notable "no you are an idiot this will not work" has been said I'm going to go ahead and order the flag pole mounts today. Anyone know if BigAir offers any discount? Also gotta measure my A3 tower for the diameter...https://www.roswellmarine.com/product/aviator-pro-wake-tower/

https://uploads.tapatalk-cdn.com/20210525/484d17cf045bb92a6744cbb6f581084a.jpg

Sent from my SM-N960U using Tapatalk

[Josh828]

Just use fishing rod mounts.
Most come power coated already and they are much stronger and offer 1-1/2" OD mounts. Much stronger rod and you can telescope to maybe cover some of the sun pad. Also way more cost friendly then the big air mounts

I haven't found any I really liked, or at least ones that will work on over 2" bars. Do like the thought of under $100 for both however


Or something like this so you can change the angle easily as the sun changes position :D
https://www.amazon.com/MonkeyJack-Swivel-Adjustable-Antenna-Ratchet/dp/B0774J9TXV
You coming to weld it on a bracket for me? haha


https://www.roswellmarine.com/product/aviator-pro-wake-tower/

https://uploads.tapatalk-cdn.com/20210525/484d17cf045bb92a6744cbb6f581084a.jpg

Sent from my SM-N960U using Tapatalk

Appreciate it! saved me a trip to the garage!!

[2in2out]

How about an SUV sun shade?

Tailgate Tent for Car- Car Awning Sun Protection Waterproof Auto Canopy Camper Trailer Tailgate Roof Top for SUV, MPV, Hatchback, Minivan, Camping

https://uploads.tapatalk-cdn.com/20210525/0c6b0b9dafb5da1f1e61c8ce51e6227f.jpg
https://www.amazon.com/dp/B08YRSGHCK/ref=cm_sw_r_cp_api_glt_fabc_SWMJZJPPJVMXE48SY2R3?_ encoding=UTF8&psc=1


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

I haven't found any I really liked, or at least ones that will work on over 2" bars. Do like the thought of under $100 for both however


You coming to weld it on a bracket for me? haha



Appreciate it! saved me a trip to the garage!!

Bruh, I'm in this too. I want to already have a solution in hand before my Mojo gets here in the winter.

I'm hoping the right folks are watching customers having to modify brand new boats and realize there is an issue.

There is nothing wrong with the A3 tower, maybe we'll see a larger bimini for '22.

Or maybe the Pro tower becomes standard in'22 and the FXOne is an option (yeah right [emoji1787])



Sent from my SM-N960U using Tapatalk

[Josh828]

How about an SUV sun shade?

Tailgate Tent for Car- Car Awning Sun Protection Waterproof Auto Canopy Camper Trailer Tailgate Roof Top for SUV, MPV, Hatchback, Minivan, Camping

https://uploads.tapatalk-cdn.com/20210525/0c6b0b9dafb5da1f1e61c8ce51e6227f.jpg
https://www.amazon.com/dp/B08YRSGHCK/ref=cm_sw_r_cp_api_glt_fabc_SWMJZJPPJVMXE48SY2R3?_ encoding=UTF8&psc=1


Sent from my iPhone using Tapatalk

The real problem with all these options are figuring out how to fasten the tent poles.


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

How about an SUV sun shade?

Tailgate Tent for Car- Car Awning Sun Protection Waterproof Auto Canopy Camper Trailer Tailgate Roof Top for SUV, MPV, Hatchback, Minivan, Camping

https://uploads.tapatalk-cdn.com/20210525/0c6b0b9dafb5da1f1e61c8ce51e6227f.jpg
https://www.amazon.com/dp/B08YRSGHCK/ref=cm_sw_r_cp_api_glt_fabc_SWMJZJPPJVMXE48SY2R3?_ encoding=UTF8&psc=1


Sent from my iPhone using TapatalkTrayson, where you at bruh? This would be right up your alley like the tent for your truck.

Sent from my SM-N960U using Tapatalk

[jnr4817]

I bought my Mojo from another guy who replaced the cup holders in the back with rod holders. One could easily stick two but pieces of pipe in there if it were already attached to the wake tower and sun shade. 29726

[Holdmybeer]

I bought my Mojo from another guy who replaced the cup holders in the back with rod holders. One could easily stick two but pieces of pipe in there if it were already attached to the wake tower and sun shade. 29726

Could easily do this to the older model Mojo but the 21 has the cup holders in the middle.

[HFarr]

I would stay away from EMT or anything that would kink and fold if bent too far. Wind or whatever the cause. Could do some damage when/if it came down. Some fiberglass tent poles look like good options with some rain flys that are super light weight. Some of the best ideas in the world come from long slow days of floating and drinking!! [emoji38]

Sent from my moto z4 using Tapatalk

[2in2out]

Another low cost option

4 Person Boat Sun Shade Shelter , Inflatable Kayak Awning Canopy Lightweight Sailboat Awning Folding Inflatables Boat Tent Awning Top Cover Fishing Tent with D-Shape Buckles for Camping Fishing

https://www.amazon.com/dp/B0933FPW67/ref=cm_sw_r_cp_api_glt_fabc_FWDFY7XTSYV6VHFW9N0S

https://uploads.tapatalk-cdn.com/20210526/469a2c8a9da2528ed0d425247452ec23.jpg


Sent from my iPhone using Tapatalk

[RC_Hinojosa]

Here's a pic of the Sewlong bimini on a Mojo.

It might be bigger but it's kinda fugly.

https://uploads.tapatalk-cdn.com/20210526/f5cf71aeb6899c0b7d79d1033c015df4.jpg

Sent from my SM-N960U using Tapatalk

[htfit]

Been a lot of discussion lately about extending the Bimini. Will admit last Sunday I tied up with two friends and we didn't move for almost 6 hours. (Thanks LetTieUp bumpers and @sandm for the box anchor)
While sitting out things got hot. Real hot. Was thinking how nice some extra shade would be when parked. Few beers later and topic got brought up about adding a flag to the boat. Now here is where it comes together, Two flag pole holders. Angle them at a 45* with a 6-10' pole with a shade cloth between the two.
Breaking it down, we have three main components the flag pole holders, the poles themselves, the fabric.

Flag pole holders- Looks like the Big Air 360* is the best and only real choice out there. Just watched their video and looks like they pulled 50lbs and the mount didn't budge. So the plan would be install two of these near the top of the tower so when angled backwards 45*-60* to provide canopy it would compliment the existing Bimini. Hoping they will be strong enough to hold.
https://images-na.ssl-images-amazon.com/images/I/61rQi89KN8L._AC_SL1500_.jpg

Poles- The big air mounts looks like they can handle a 7/8" pole.
So I'm thinking either a wooden dowel rod? 3/4" pvc (outside diameter is right at 7/8") or even trying to find an aluminum rod. I am completely at a loss for the pole so any suggestions welcome. Also maximum length y'all think this rig could handle before collapse
Just tested out a piece of 3/4" metal conduit EMT, and easily put 40lbs on it with no bending hardly at all. Pvc moved a great deal however the sag wouldn't be the worst thing either..

Fabric- Thinking of a mesh or other super lightweight but shading fabric, I think if the wind could come through it great. Looked at some SPF fabrics as well. Sewing two sleeves in each side to slide the poles into. Really once done the poles and fabric could be rolled up and stored. Unroll slide poles into holders and done.

Below is a great shop approved drawing. Let me know what y'all think, anyone ever tried this? Anyone with a flag holder who can say?
Step 1 will be buy the flag pole holders, Find an appropriate rod. Then lastly the fabric.
https://uploads.tapatalk-cdn.com/20210525/4b40337d6371feb62bb361bfb5e7f6aa.jpgI purchased the big air flag holders to extend the bimini. Just purchase the flag poles from big air also. They fit perfect of course and are strong enough to have a flag on them waving in the wind. Then come in different lengths. I shortened the ones I got to match the length of the canopy.

Sent from my SM-G960U1 using Tapatalk

[Ironman10]

I've been working on some ideas for this exact same thing, but haven't pulled the trigger yet because I'm still waiting on my ride to get the final measurements. I looked at sewlong, but didn't want to spend the $2K for it ... had to be a better way. Very interested to see how this turns out.

[Holdmybeer]

Here's a pic of the Sewlong bimini on a Mojo.

It might be bigger but it's kinda fugly.

https://uploads.tapatalk-cdn.com/20210526/f5cf71aeb6899c0b7d79d1033c015df4.jpg

Sent from my SM-N960U using Tapatalk

For the price, you would think it would cover more.

[RC_Hinojosa]

For the price, you would think it would cover more.The other thing equally as important for those of us without a lakehouse or a slip....how fast does it break down when it's time to hit the road?

It looks like it just barely reaches the windshield in terms of coverage.



Sent from my SM-N960U using Tapatalk

[z28ke]

It seems like one of these could work:

https://oceansouth.us/shop/ttops/ttop-extensions/t-top-extension-kit-stern-shade/?attribute_pa_extension=size-6-8ft-x-7ft-x-5ft&attribute_pa_color=black&dTribesID=607699f08aad721b42abd7446d78deae%7Cadtri bes%7C7810&utm_source=Facebook%20Dynamic%20Ads%20/%20Instagram%20Remarketing&utm_campaign=oceansouth.us&utm_medium=cpc&utm_term=7810&gclid=EAIaIQobChMIwNevwaTn8AIVAY6zCh2zoQrkEAQYCSAB EgJMG_D_BwE

[Josh828]

The other thing equally as important for those of us without a lakehouse or a slip....how fast does it break down when it's time to hit the road?

It looks like it just barely reaches the windshield in terms of coverage.



Sent from my SM-N960U using Tapatalk
Yeah for the price you get an extra foot or two of coverage is all..


It seems like one of these could work:

https://oceansouth.us/shop/ttops/ttop-extensions/t-top-extension-kit-stern-shade/?attribute_pa_extension=size-6-8ft-x-7ft-x-5ft&attribute_pa_color=black&dTribesID=607699f08aad721b42abd7446d78deae%7Cadtri bes%7C7810&utm_source=Facebook%20Dynamic%20Ads%20/%20Instagram%20Remarketing&utm_campaign=oceansouth.us&utm_medium=cpc&utm_term=7810&gclid=EAIaIQobChMIwNevwaTn8AIVAY6zCh2zoQrkEAQYCSAB EgJMG_D_BwE

All of these require fishing pole holders drilled into the boat

[RC_Hinojosa]

Fishing pole holders.

THAT'S what makes the huk panties drop. [emoji1787]

Sent from my SM-N960U using Tapatalk

[jph3]

All of these require fishing pole holders drilled into the boat

Or
https://www.seasucker.com/products/sup-rod-holder?currency=USD&variant=28070757329&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=CjwKCAjw47eFBhA9EiwAy8kzNNizgJFJ3Q3OUt8BIx1X pmXByn2n_8J2ONgvVBew3aUldZTIGdKmOhoCDz0QAvD_BwE

[Josh828]

I purchased the big air flag holders to extend the bimini. Just purchase the flag poles from big air also. They fit perfect of course and are strong enough to have a flag on them waving in the wind. Then come in different lengths. I shortened the ones I got to match the length of the canopy.

Sent from my SM-G960U1 using Tapatalk

I missed this comment! Would love to see how it works out since you apparently have beaten me to the punch! Knew I couldn't have been the only one with the idea haha

[Josh828]

Or
https://www.seasucker.com/products/sup-rod-holder?currency=USD&variant=28070757329&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=CjwKCAjw47eFBhA9EiwAy8kzNNizgJFJ3Q3OUt8BIx1X pmXByn2n_8J2ONgvVBew3aUldZTIGdKmOhoCDz0QAvD_BwE


Im also worried about my clumsy friends all over the back of the boat taking out a pole haha so if everything extends from the tower no worries

[Ironman10]

I missed this comment! Would love to see how it works out since you apparently have beaten me to the punch! Knew I couldn't have been the only one with the idea haha

How are you guys making out on this project? I’m still anxiously awaiting my ride, but this idea is certainly near the top of the list of early projects I’m considering.

[Josh828]

How are you guys making out on this project? I’m still anxiously awaiting my ride, but this idea is certainly near the top of the list of early projects I’m considering.

I have unfortunately abandoned the project haha

I had a Bimini error (I destroyed it)

So now will be replacing the Bimini with a sew long and getting the 8' Bimini extension as well.

[Holdmybeer]

I have unfortunately abandoned the project haha

I had a Bimini error (I destroyed it)

So now will be replacing the Bimini with a sew long and getting the 8' Bimini extension as well.

I'm looking forward to see your SewLong setup once you have it installed. I am still interested in this project but some surprise maintenance is now my concerns over this. I have the poles made but still need the clamps and fabric.

[Josh828]

Yeah it isn't the worst thing that's ever happened just hated the idea of the price but I'm in it deep now anyways haha

They said it will be September most likely which considering the state of the world I think is more than fair

[Holdmybeer]

Yeah it isn't the worst thing that's ever happened just hated the idea of the price but I'm in it deep now anyways haha

They said it will be September most likely which considering the state of the world I think is more than fair

I read your other post about how it happened. Were you able to "duct tape" a fix for the summer? Regardless how it looks the sun gets hot and we use are bimini every outing. My wife bought some towel clips that we use to hang towels and such to keep the sun off the seats. Just a thought while you wait.

[htfit]

I just have a couple gromets to add to my bimini and it will be finished. Seems like it is going to work well and hold strong but have yet to take it on the lake. I have just been playing with different angles to make sure it does not interfere with surf rope.

Sent from my SM-G960U1 using Tapatalk

[Holdmybeer]

I just have a couple gromets to add to my bimini and it will be finished. Seems like it is going to work well and hold strong but have yet to take it on the lake. I have just been playing with different angles to make sure it does not interfere with surf rope.

Sent from my SM-G960U1 using Tapatalk

Picture when you can, please. I was hoping to make mine into 2 sections - a 4ft section I can leave while surfing, and another 4ft section that will slip in while swimming. The 8ft should make it to the sunpad, the trick is getting clamps strong enough to not rotate while 8ft long.

[jnr4817]

I ordered 2 tarp extension poles, a ultralight tarp/awning 5x7, 2 ultralight tie-downs. I already have ss cup holders with rod holder in it. Plan is to insert telescopic tarp poles into rod holder. Attach tarp and use tie-downs on cleats. Then use bungee or straps to attach tarp to tower. Should give a large amount of coverage and be light weight.

[Josh828]

I read your other post about how it happened. Were you able to "duct tape" a fix for the summer? Regardless how it looks the sun gets hot and we use are bimini every outing. My wife bought some towel clips that we use to hang towels and such to keep the sun off the seats. Just a thought while you wait.

Its actually still useable! Lost the middle bar that keeps the middle tight and the other bars are bent a little but still functioning. Some fraying on the canvas next to the tow point but all and all its not bad at all.

[KirenLawr]

I only found out about it now, I don't know how it works, but looks to be something enthralling. I should know how powerfully built is it, I always have strong winds. This is the drawback that I had with all flagpoles. I have been looking for a up to scratch flagpole, and if it is qualitative I will definitely buy it for my garden. The only one part that I love at my flagpole is Solar Flag Pole Light. I found it on https://www.amazon.com/Flagpole-Energy-Battery-Illumunation-Vont/dp/B00YBDA7DC/ and at night it looks stunning

[htfit]

Anybody ever explored this option? Not sure about how it would look with one facing forward and one facing the rear but it would be super easy to deploy.

https://www.sureshade.com/rtx-pull-out-boat-shade/

Sent from my SM-G960U1 using Tapatalk

[Holdmybeer]

Anybody ever explored this option? Not sure about how it would look with one facing forward and one facing the rear but it would be super easy to deploy.

https://www.sureshade.com/rtx-pull-out-boat-shade/

Sent from my SM-G960U1 using Tapatalk

My brainstorming lead me down this path. I was able to find SS tubing that slid together 3/4 od and 1-1/8 od. Then I was going to use pins like the bimini top to secure once they slip out. Basically a 4ft piece with a slide out 4ft piece. The clamps were the issue. I had to buy raw aluminum clamps then weld the rod holder to them (never made it to this point). Next was fabric and I found sunbrella material local but never purchased.

[haknslash]

Man I was hoping someone had fully committed so we can see the result. I would love to get more shade on the boat. The A3 bimini is fine for me as far as forward shade goes so I'm not seeing what the Sewlong bimini has to offer there over stock. My main gripe is lack of rear shade. My concern with the fiberglass pole is someone is eventually going to lean or accidentally grab the thing...and then what? Does it snap and slam into your nice gelcoat? I like the idea of the telescoping approach where you get shade but don't gain any "obstacles" to avoid like the fiberglass pole tent things that are becoming the next thing. There has to be a way to fab up some sort of telescoping arm that swing out of the way to stow and not cost a couple of grand.

[htfit]

I have the flag pole clamps on, rods cut to size, I just have to attach the fabric to the rods and it is done. I will try to finish it tonight and test it at the lake tomorrow.

Sent from my SM-G960U1 using Tapatalk

[htfit]

I also just like the idea of installing that sureshade about 2' back from the rear of the tower or as far back as possible without interfering with the rope and be able to deploy it forward and have plenty of shade.

Sent from my SM-G960U1 using Tapatalk

[Holdmybeer]

This is a winter project for me. I sourced the framework and clamps because of covid. However, it got warm out and using the boat was a larger priority then adding to the boat.

Certainly not giving up on it just going to spend the time and do it right in the cold.

[jderb]

Did anyone ever complete this project? Any pics?

[trayson]

it's almost exactly what nautty uses on the paragon for extended sunshade.
fiberglas poles in the back corners go up to sunbrella that is attached to the back of the bimini.
nautty are using some recessed holes that the 'glas poles go into that are super slick but likely a couple bills each.

https://www.premierboating.com/wp-content/gallery/2021-nautique-g25-paragon-mock-build/2021-Nautique-G25-Paragon-Wake-Boat-Extended-Sunshades.jpg

well since i already have HDPE for my custom swim platform pretty easy to drill holes in that

[trayson]

Trayson, where you at bruh? This would be right up your alley like the tent for your truck.

Sent from my SM-N960U using Tapatalk

where have i been and how did i miss getting called out. but for the record i ditched my truck bed tent for a fully self contained badass truck camper.

i think these would work great for telescoping poles
https://www.amazon.com/Lineslife-Telescoping-Floating-Lightweight-Aluminum/dp/B09HXLZG4Q/ref=sr_1_6?crid=3L5H8470UDEDH&keywords=telescoping%2Bdocking%2Bpole&qid=1652900172&sprefix=telescoping%2Bdocking%2Bpole%2Caps%2C339&sr=8-6&th=1
and as a bonus you could use them if you suck at docking!

https://m.media-amazon.com/images/I/41BaqwCTk0L._AC_SX679_.jpg

[Holdmybeer]

Did anyone ever complete this project? Any pics?

My wife told me NO.
She then asked what is the purpose of being on the boat and outside if you aren't going to enjoy it.
I had no way to argue because the factory bimini covers the drivers seat, and less work for me.