PDA

View Full Version : Backlit sign


mikenehrkorn
05-08-2021, 02:21 PM
Anyone ever installed this before? Do you cut a hole in the plastic and let the led show thru the hole to the sign or just somehow mount the sign with the led right behind it WITHOUT cutting a hole?

https://uploads.tapatalk-cdn.com/20210508/63a674a71b46fee3e4ed51e08651f6d3.jpg

https://uploads.tapatalk-cdn.com/20210508/f83328df498047d18fe88e97528ddec0.jpg
Tommy2slow
05-08-2021, 04:47 PM
Lots of talented folks on this forum so someone will have some good advice but that illuminated sign was stock on Moombas for awhile. I think it was dropped for 2021. My 2020 Mojo came stock with it.
haknslash
05-08-2021, 07:32 PM
The LED is made with the housing. It believe it’s just stuck on there with backing tape. Of course you’ll need to drill a small hole behind it for the wires to pass thru.
mikenehrkorn
05-08-2021, 08:53 PM
The LED is made with the housing. It believe it’s just stuck on there with backing tape. Of course you’ll need to drill a small hole behind it for the wires to pass thru.

I didn’t realize the light was included, that makes it even easier - thanks for the info!!