notqualifiedforthis
03-12-2021, 06:37 PM
Hey all, signed up to get some advice on phase 1 of the audio upgrade we're doing on my cousin's new to him 2014 Moomba Mojo 2.5. I don't know what is original vs added by the previous owners. He was going to pay a guy to do it all but I was able to climb around the boat today and I think we can take care of it ourselves. The amp rack setup made everything extremely accessible and seems pretty straight forward.
Phase 1 - ASAP - speaker replacement, appropriate wiring, & amp addition for towers
Phase 2 - 1+ year(s) down the road - sub replacement, amp upgrades for seating area & sub
First, speakers
Seating area speakers will be Wet Sounds REVO 6 – SWB (4 ohms, 100 watt RMS / 200 watt peak)
Tower speakers will be Wet Sounds Rev 10 B-FC (4 ohms, 300 watt RMS / 600 watt peak)
Second, the mix & matched amps and where I'm struggling with wiring and setup ideas. I've bold, italicized, and used red front for my choice of connection.
NEW AND NEEDS ADDED TO THE LINEUP - Wet Sounds SYN-DX4
125 watts RMS x 4 at 4 ohms (200 watts x 4 at 2 ohms)
400 watts x 2 bridged at 4 ohms (4-ohm stable in bridged mode) - Towers
Kicker 40KX8005
50 watts RMS x 4 @ 4 ohms + 200 watts RMS x 1 @ 4 ohms
100 watts RMS x 4 @ 2 ohms + 400 watts RMS x 1 @ 2 ohms – 2 in front bow seating area, 2 in rear seating area aimed forward, & sub under helm
200 watts RMS x 2 bridged @ 4 ohms + 400 watts RMS x 1 @ 2 ohms
Kicker 11DX3002
75 watts RMS x 2 @ 4 ohms - remaining 2 in rear seating area
150 watts RMS x 2 @ 2 ohms
300 watts RMS x 1 bridged @ 4 ohms (4-ohm stable in bridged mode)
One of my first concerns is power for the new amp. Here is a pic of the distribution block/rail. Boat has 2 batteries and 2 amps already. The DASH POWER and ACC slots look unused so I was thinking it may still have enough to run another class D amp (the WS SYN-DX4). If I'm clear on power, the rest is just wiring in the new power line, grounding to the far right bolt with the other 2 grounds, and figuring out where to mount the new amp on the board.
29485
Phase 1 - ASAP - speaker replacement, appropriate wiring, & amp addition for towers
Phase 2 - 1+ year(s) down the road - sub replacement, amp upgrades for seating area & sub
First, speakers
Seating area speakers will be Wet Sounds REVO 6 – SWB (4 ohms, 100 watt RMS / 200 watt peak)
Tower speakers will be Wet Sounds Rev 10 B-FC (4 ohms, 300 watt RMS / 600 watt peak)
Second, the mix & matched amps and where I'm struggling with wiring and setup ideas. I've bold, italicized, and used red front for my choice of connection.
NEW AND NEEDS ADDED TO THE LINEUP - Wet Sounds SYN-DX4
125 watts RMS x 4 at 4 ohms (200 watts x 4 at 2 ohms)
400 watts x 2 bridged at 4 ohms (4-ohm stable in bridged mode) - Towers
Kicker 40KX8005
50 watts RMS x 4 @ 4 ohms + 200 watts RMS x 1 @ 4 ohms
100 watts RMS x 4 @ 2 ohms + 400 watts RMS x 1 @ 2 ohms – 2 in front bow seating area, 2 in rear seating area aimed forward, & sub under helm
200 watts RMS x 2 bridged @ 4 ohms + 400 watts RMS x 1 @ 2 ohms
Kicker 11DX3002
75 watts RMS x 2 @ 4 ohms - remaining 2 in rear seating area
150 watts RMS x 2 @ 2 ohms
300 watts RMS x 1 bridged @ 4 ohms (4-ohm stable in bridged mode)
One of my first concerns is power for the new amp. Here is a pic of the distribution block/rail. Boat has 2 batteries and 2 amps already. The DASH POWER and ACC slots look unused so I was thinking it may still have enough to run another class D amp (the WS SYN-DX4). If I'm clear on power, the rest is just wiring in the new power line, grounding to the far right bolt with the other 2 grounds, and figuring out where to mount the new amp on the board.
29485