Need to know how much room the 1100's take

[Holdmybeer]

So, I am new here and soaking up all the info I can.

I just picked up my first wake boat, 2015 mojo.
Great shape, and very pleased.
However, wife is already concerned about storage with the previous owner upgrading to 1100's in the lockers, and then lead under the seats.
I have full access to a fab shop and even some of the skills to use the tools and I want to make trays for all 3 openings.

Here is the $$ question....how deep can I make them over the 1100's? Do they come all the way up or just half way? They are the Wakemakers perfect fit version. Look to be cudes 24"x24"x50" but aren't there fittings and such that stick out the top?

If I can get a picture for reference, I can even take my own measurements from the pic.

Thanks for the help guys.

[SONIC]

grab an air compressor/inflatable pump/leaf blower and blow the bags up, then you can be 100% sure.

[Holdmybeer]

Did not even think of that.

I know what I'm doing tonight.

Thanks

[SONIC]

A whole lot lighter than water too :D

[BigOrange]

You can get some trays in there if you want, but not near as deep as the factory ones offered on current models. I don’t think my 1100s are “exact fit” but still close to your measurements.

Just a rough guess I’d say you could get a max of 8 to 10” deep and allow for the vent hose to come off the top of the bag, if that much.

[Holdmybeer]

I was looking at only 8" deep trays. Just a place to put fenders, tow ropes, etc. Nothing crazy.

Just would like to be able to leave the wet stuff in the back and not drag it through.

Thanks

[larry_arizona]

Doesn’t Moomba make an over engine tray for the last Gen Mojo’s? Nice option for wet gear and preheating vests.


Sent from my iPhone using Tapatalk

[Holdmybeer]

Doesn’t Moomba make an over engine tray for the last Gen Mojo’s? Nice option for wet gear and preheating vests.


Sent from my iPhone using Tapatalk

You are correct.
However, $200+ for a piece of 4" deep plastic just isn't good enough.
I can buy all my aluminum for less and build all 3 trays. I know my time is worth something but it's for me so I write that off.