Anyone tried adding extra racks to their Pro Tower?

[996scott]

I'm wanting to add a Monster waterski rack to my Pro Tower since there is nowhere to put skis. I was hoping the skis would fit in the wakboard racks but unfortunately they don't. So we have to put our skis up under the bow center cushion and then they stick out and are a pain for people going up to the bow and back. It doesn't look like there is a lot of room between the oem swivel racks and the bimini arm. Not sure if I can get a waterski rack to mount between them. Anyone added another rack to their Pro tower?

[cpropes2005]

I have the monster ski rack on my Makai with the Pro tower. Will see if I can find a picture.

[cpropes2005]

Had to screen shot a video but you can see the ski up there.
https://uploads.tapatalk-cdn.com/20201102/dca8fc2c19a1e9e461259ebdfef1e851.jpg


Sent from my iPhone using Tapatalk

[996scott]

That's awesome, thanks. Good to know it will fit. Hoping someone will have one on Black Friday. Thanks again.

[jcarter20]

https://uploads.tapatalk-cdn.com/20201104/ec41d0bb5676b2cec47be4831e378bb6.jpg
I don’t have the Pro Tower, but this is what I did. I purposely did not buy the Triton racks for that reason. I was afraid I would struggle to pull the boards up and out with the ski racks. These are Roswell.


Sent from my iPhone using Tapatalk

[996scott]

is it mounted to one of the tubes or a crossbeam?

[jcarter20]

It is mounted to one of the vertical tubes to get it as high as possible without interfering with the Bimini.


Sent from my iPhone using Tapatalk

[Tylerrnemt]

https://uploads.tapatalk-cdn.com/20201104/ec41d0bb5676b2cec47be4831e378bb6.jpg
I don’t have the Pro Tower, but this is what I did. I purposely did not buy the Triton racks for that reason. I was afraid I would struggle to pull the boards up and out with the ski racks. These are Roswell.


Sent from my iPhone using Tapatalk

I have a slalom rack just like this I removed from my LSV...... I've been debating whether or not to install on my Mojo..... I have to not only fold my tower, but completely unbolt it and disconnect at it's pivot point to fit in my 8ft garage door..... are you able to lower your tower all the way with the rack in that position without it hitting the windshield?

[jcarter20]

I have a slalom rack just like this I removed from my LSV...... I've been debating whether or not to install on my Mojo..... I have to not only fold my tower, but completely unbolt it and disconnect at it's pivot point to fit in my 8ft garage door..... are you able to lower your tower all the way with the rack in that position without it hitting the windshield?

I will be honest, I don’t know. I am lucky enough that I can leave my tower up when backing into my barn. I bet I have only lowered the tower once, and I don’t recall if the racks were on or not. I will look this week and see if they hit.


Sent from my iPhone using Tapatalk

[Tylerrnemt]

I will be honest, I don’t know. I am lucky enough that I can leave my tower up when backing into my barn. I bet I have only lowered the tower once, and I don’t recall if the racks were on or not. I will look this week and see if they hit.


Sent from my iPhone using Tapatalk

Thanks for the Reply!... You don't need to go out of your way to check.... I could alway just put mine on and see what happens! lol

[jcarter20]

Thanks for the Reply!... You don't need to go out of your way to check.... I could alway just put mine on and see what happens! lol

Sorry it took me a little bit, but I checked tonight and they do hit the windshield if I lower the tower. If you mounted them on the tube towards the rear of the boat, and got a swivel rack it might work.


Sent from my iPhone using Tapatalk

[jcarter20]

https://uploads.tapatalk-cdn.com/20210221/4fe8f8267ce4118a180d81eac09cfadc.jpg
https://uploads.tapatalk-cdn.com/20210221/61a629ae8acf6f6078effce20cce64cc.jpg
https://uploads.tapatalk-cdn.com/20210221/63a27269d20798fc6d283a1c61ca2673.jpg


Sent from my iPhone using Tapatalk