Raptor 575 Impeller [Archive]

KR2019SE550

10-23-2020, 03:30 PM

Has anyone changed the impeller on this motor? It seems impossible!

larry_arizona

10-23-2020, 03:59 PM

What boat? Typically you remove surf locker inner engine cover and the impeller housing is super easy to access.

I figured an SE550 from your name, so pull inner surf locker and it will be a piece of cake for ya....

https://uploads.tapatalk-cdn.com/20201023/c419c1996fd061a7245bb83c45d2350c.jpg

Sent from my iPhone using Tapatalk

dakota4ce

10-23-2020, 04:15 PM

Yes—you end up taking it from behind.....[emoji2373][emoji6]

Sent from my iPhone using Tapatalk

Boonejeepin

11-12-2020, 02:34 PM

Has anyone changed the impeller on this motor? It seems impossible!

I have and it is a major chore. For a couple hours I thought it was impossible too.

Sent from my iPhone using Tapatalk

Boonejeepin

11-12-2020, 02:36 PM

What boat? Typically you remove surf locker inner engine cover and the impeller housing is super easy to access.

I figured an SE550 from your name, so pull inner surf locker and it will be a piece of cake for ya....

https://uploads.tapatalk-cdn.com/20201023/c419c1996fd061a7245bb83c45d2350c.jpg

Sent from my iPhone using Tapatalk

The 550/575 has a more complex cooler mounted in front of the engine that blocks access to the housing. Access is extremely tight.

I worry that it would not be possible to do on the water in an emergency. Any boat movement would create chaos.

Sent from my iPhone using Tapatalk