Using stock fly high bags manually

[Bch53211]

I swapped out my stock fat sacks for the wakemakers bigger bags. If I want to use the stock bag manually , what do I need to do? I realize I’ll need a tsunami pump and need to remove the fill fitting. I’m thinking I need some sort of adapter/fittings to plug the old fill port at the bottom and one to connect the tsunami pump for manual fill?

[Byezb]

I swapped out my stock fat sacks for the wakemakers bigger bags. If I want to use the stock bag manually , what do I need to do? I realize I’ll need a tsunami pump and need to remove the fill fitting. I’m thinking I need some sort of adapter/fittings to plug the old fill port at the bottom and one to connect the tsunami pump for manual fill?

These are what you are looking for. There is a video in the link also. This will help remove factory fittings

https://www.wakemakers.com/supra-moomba-portable-pump-fitting-kit.html

[ssevey17]

Be careful as some of the factory fittings are glued in and can't be removed without ruining the bag. Call the bag manufacturer just to verify

[Bch53211]

Thanks so much Byezb, just ordered it

[Bch53211]

I appreciate the heads up Scott. As it happens , fly high is about a mile from where I live, I’ll stop by and ask.

[Bch53211]

I have about 4300 lbs of ballast already but have the extra two stock 650s. I want to experiment, maybe put the extra 650 in the front to try to lengthen the wave and just curious to see if more weight helps