View Full Version : Extend Bow Bag Tubing
jnr4817
09-12-2020, 07:25 PM
I am need to extend by bow bag tubing. It is the drain side, I think, side with the AMP rack, under the glove box.
I am wanting to move the bag more towards the bow, approx 10-12 inches. I cannot pull anymore slack out of the current tubing. I am not sure how it terminates under the black vent cover.
Any help is appreciated.
https://i.imgur.com/t13X9sx.jpg
rockymtnsurfer
09-13-2020, 09:13 AM
cut off metal band......heat the tubing (watch out to not heat right angle quick release) pull off quick release ...then take a male/ male coupler and extend it 12" and put the quick release back on. (of course band everything back together )
jnr4817
09-16-2020, 03:58 PM
I am not at home, but do we know the stock size for tubing and connectors. If memory serves, they appear to be 1 1/8", but I can't be sure. Won't be at boat for a few days.
htfit
09-16-2020, 09:29 PM
My max factory lines were all 1".
Sent from my SM-G960U1 using Tapatalk
rockymtnsurfer
09-17-2020, 07:36 AM
My max factory lines were all 1".
Sent from my SM-G960U1 using Tapatalk
Mine are 1" too, but some of the quick connects are 1 1/8 and you just need to heat the tubing to get them on
DNIXD99
09-17-2020, 08:36 AM
Mine are 1" too, but some of the quick connects are 1 1/8 and you just need to heat the tubing to get them on
Heat is definitely the difference between wanting to set the boat on fire, or it being a quick simple task.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.