Oil Extractor

[jcarter20]

Does anyone have any good recommendations for an oil extractor? I have had two now and both were crap. They take forever to extract the oil regardless if the engine is warmed or not.


Sent from my iPhone using Tapatalk

[larry_arizona]

I like this one a lot.

Drains in a couple minutes.


OEMTOOLS 24397 9.5 Liter Oil Extractor, Oil, Transmission, Coolant Change Tool, Easy-to-Use Hand Pump, Extract Fluid Through Dipstick Tubes, No Mess https://www.amazon.com/dp/B01BW393E2/ref=cm_sw_r_cp_api_i_JkxvFbSWJM9XK


Sent from my iPhone using Tapatalk

[996scott]

i use a drill pump and it works awesome. you just need to get a connector to screw into the engine drain hose.


https://www.walmart.com/ip/Portable-Electric-Drill-Pump-Self-Priming-Transfer-Pumps-Oil-Fluid-Water-Pump/676384914?wmlspartner=wlpa&selectedSellerId=101001360&&adid=22222222227319714743&wl0=&wl1=g&wl2=c&wl3=397770627071&wl4=pla-841441857505&wl5=9029761&wl6=&wl7=&wl8=&wl9=pla&wl10=128133340&wl11=online&wl12=676384914&veh=sem&gclid=EAIaIQobChMIvNnSj_LV6wIVEb7ACh0RBQ72EAQYAyAB EgJwQvD_BwE

[jcarter20]

Appreciate it. I have the drill type from my old runabout. Never thought about getting an adapter and hooking that to the drain hose.

I like the pump type so I can change the trans and v drive fluid also.

Both good tips. Thank you.


Sent from my iPhone using Tapatalk

[VA LSV]

I have this one as well and it works great on the Moomba, outboard on the toon, jet ski, mowers, etc.

OEMTOOLS 24397 9.5 Liter Oil Extractor, Oil, Transmission, Coolant Change Tool, Easy-to-Use Hand Pump, Extract Fluid Through Dipstick Tubes, No Mess https://www.amazon.com/dp/B01BW393E2..._JkxvFbSWJM9XK