View Full Version : mojo taking on water
philnizz
09-04-2020, 04:38 AM
my 2016 mojo is taking on water somewhere in the enginge compartement. it startet to get noticable when i installed the FAE. It's not a big deal but i want to have it fixed because i'd prefer a dry bilge and dont want the pump to kick on regularly.
it's definitely not a ballast issue. must be somehere on the exhaust hose or anything in that area. anyone had the same experience on their boat and knows how to fix it?
RC_Hinojosa
09-04-2020, 08:27 AM
Inspect the welds on the FAE as well as the thru-hull bolts.
Those are two common points of entry.
Sent from my Note 9 using Tapatalk
jcredible
09-04-2020, 12:33 PM
Yeah, if your boat is in the water....try and wiggle the FAE...if there is play then you probably cracked a weld and snapped a bolt.
Easiest way to see is pull the engine divider panel and a flashlight....you will see a slow trickle of water coming in.
philnizz
09-07-2020, 07:19 AM
28984
28985
I checked the exhaust today and it seems to be dry. I found that pump shown in the picture dripping, like every 3 seconds when engine is on. Is this the raw water pump? Probably more water is coming when driving. Any idea how to fix that?
schwan
09-07-2020, 08:54 AM
That's your heater pump. It would be leaking antifreeze. It is common that the connections leak, just need to be tightened down.
Sent from my SM-G988U using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.