Fat Sac Replacement Issue

[drlynes]

Hi, I have a 2016 Mondo that came with 750# fat sacs in the rear.
I've purchased 1150# fat sacs that will fit (from Wakemakers).
The issue I'm having is removing the quick connects from the old bags to install them on the new one. There is a top connector and a bottom connector, they're identical.
All of the other plugs screw in, I'm assuming all 4 port holes are identical.
I can't even budge the screw-in quick connects, are they just screwed in or is it possible they screwed and glued them in from the factory?
Or am I just weak?

Thanks.

[MJHSupra]

Hi, I have a 2016 Mondo that came with 750# fat sacs in the rear.
I've purchased 1150# fat sacs that will fit (from Wakemakers).
The issue I'm having is removing the quick connects from the old bags to install them on the new one. There is a top connector and a bottom connector, they're identical.
All of the other plugs screw in, I'm assuming all 4 port holes are identical.
I can't even budge the screw-in quick connects, are they just screwed in or is it possible they screwed and glued them in from the factory?
Or am I just weak?

Thanks.

If you are talking about the fittings that are glued in, you have to heat them with a hair dryer for 10-20 mins, and break the seal with you foot.

There is a video on this:

https://youtu.be/qpW_x9MeAQo


Sent from my iPhone using Tapatalk

[Stazi]

I recommend just buying new fitting and glueing those in as well. Use JB Weld Marine formula.


Sent from my iPhone using Tapatalk

[drlynes]

If you are talking about the fittings that are glued in, you have to heat them with a hair dryer for 10-20 mins, and break the seal with you foot.

There is a video on this:

https://youtu.be/qpW_x9MeAQo


Sent from my iPhone using Tapatalk

Thanks, found the video.

[drlynes]

I recommend just buying new fitting and glueing those in as well. Use JB Weld Marine formula.


Sent from my iPhone using Tapatalk

Thanks, that's what I decided to do.