spatty99
06-25-2020, 11:07 AM
Anyone happen to know exactly how the ballast hoses are routed inside the hull (2017 Helix)?
I have a hairline split in the inlet hose just in front of the (starboard rear) ballast bag inlet. There isn't enough hose length/slack to just trim out the bad part, so I need to replace the entire hose. It looks like the hose might route from directly above, but it doesn't feel like a direct connection when pulling on the hose (and it would have a fairly sharp almost 90 degree bend).
I have a hairline split in the inlet hose just in front of the (starboard rear) ballast bag inlet. There isn't enough hose length/slack to just trim out the bad part, so I need to replace the entire hose. It looks like the hose might route from directly above, but it doesn't feel like a direct connection when pulling on the hose (and it would have a fairly sharp almost 90 degree bend).