Clear film to protect back of boat above platform

[Max673]

Gents - where can I buy the clear film that is applied on back of boat right above the swim platform. Looking to protect that area from surf boards hitting it. Thanks


Sent from my iPhone using Tapatalk

[larry_arizona]

Gents - where can I buy the clear film that is applied on back of boat right above the swim platform. Looking to protect that area from surf boards hitting it. Thanks


Sent from my iPhone using Tapatalk

VViViD 3M Scotchgard Clear Paint Protection Vinyl Film (6 Inch x 60 Inch) https://www.amazon.com/dp/B004VG8DS0/ref=cm_sw_r_cp_api_i_0GK5Eb9QQ5YXT

Many options on Amazon.


Sent from my iPhone using Tapatalk

[Max673]

Was under the impression there were pre-formed films you could purchase specific to your boat?


Sent from my iPhone using Tapatalk

[larry_arizona]

Not aware of anyone doing precut, this stuff is easy to cut to any shape you want.

Take some measurements for width and order the max width you need and trim the rest.


Sent from my iPhone using Tapatalk

[Isaguel]

Good idea. I wonder how it would work on the front of the hull, where it contacts the trailer roller. The roller leaves scuff marks over time. WOnder if this would hold up?

[larry_arizona]

Film works great for any high traffic surfaces. Try it and if you don’t like it, it peels off.

Cheap insurance.


Sent from my iPhone using Tapatalk

[jcarter20]

Good idea. I wonder how it would work on the front of the hull, where it contacts the trailer roller. The roller leaves scuff marks over time. WOnder if this would hold up?

A good thought. They make these for the bow also.

https://www.overtons.com/scuff-buster-bow-guard-5.75-x-4.5-315050.html




Sent from my iPhone using Tapatalk

[Max673]

Ended up going with matching sea Deck on the transform above the swim platform to protect it from surf boards hitting this area. Came out great. https://uploads.tapatalk-cdn.com/20210805/02af99cb09edc34df86c21cb7d25c215.jpg


Sent from my iPhone using Tapatalk

[HFarr]

That looks great!!

Sent from my moto z4 using Tapatalk

[Max673]

Bit of a pain to install as I did it while boat was on my lift…but it turned out great. Really like it.


Sent from my iPhone using Tapatalk

[Emilware]

Ended up going with matching sea Deck on the transform above the swim platform to protect it from surf boards hitting this area. Came out great. https://uploads.tapatalk-cdn.com/20210805/02af99cb09edc34df86c21cb7d25c215.jpg


Sent from my iPhone using Tapatalk

Looks great [emoji106] Where did you order this from? And much was it?


Sent from my iPhone using Tapatalk

[Max673]

Look up “Surftoys” on Facebook, see below, Shane is the owner. I’m in Dallas and he is local. He is right by the Moomba dealer and went up there and took all the measurements. I have my boat on a lake about an hour away. He likely still has all the measurements if you want to reference my order. Give him my name, Mark Campbell. We did entire transaction over Facebook messenger and a phone call or two. Charged me $148 including shipping.
https://uploads.tapatalk-cdn.com/20210811/24d5532bad40338e6479165cd12e30f6.jpg


Sent from my iPhone using Tapatalk