2003 Moomba Outback replacement muffler Inlet 3.5" x outlet 3"

[pipnj25]

Hi Moomba Family. New to this forum and second season owning my boat. Put it in the water and the muffler has a split as does the inlet hose. Struggling to find a replacement new or used muffler with a 3.5" Inlet and a 3" outlet and a 45 degree on the inlet. Anyone direct me in the right direction to source one or advice on a suitable muffler to swop out solution. So appreciated. Thanks.
Phil

[Stazi]

https://www.marinepartssource.com/3-verna-ski-inline-fiberglass-muffler-centek-1000216?gclid=CjwKCAjw_LL2BRAkEiwAv2Y3SajLFgy03t2D Gn86_KsRIpz3qy5b4G-hOG4EFyK6Vbg5PVY-R4kAHRoCMNUQAvD_BwE


Sent from my iPhone using Tapatalk

[Fastest1]

I pulled them out entirely. I use a piece of SS tubing from the guys at FAE. Since they are water cooled they never even get uncomfortable to touch. I like the sound too but I run the full FAE system.

[pipnj25]

https://www.marinepartssource.com/3-verna-ski-inline-fiberglass-muffler-centek-1000216?gclid=CjwKCAjw_LL2BRAkEiwAv2Y3SajLFgy03t2D Gn86_KsRIpz3qy5b4G-hOG4EFyK6Vbg5PVY-R4kAHRoCMNUQAvD_BwE


Sent from my iPhone using Tapatalk

Thank you so much but the issue i have is one end of the muffler is 3" and the other end is 3.5". I have spent hours trying to find one on line.

[Stazi]

Thank you so much but the issue i have is one end of the muffler is 3" and the other end is 3.5". I have spent hours trying to find one on line.

Use this to make the transition.

https://www.motionraceworks.com/products/3-to-3-5-aluminum-6061-transition-formed?utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=Cj0KCQjwwr32BRD4ARIsAAJNf_009ZxekKqkEIErB5Ea-BdEUyI1_Y1LTIVloIw0ghs7Fp6o0j9iecQaAv24EALw_wcB


Sent from my iPhone using Tapatalk

[pipnj25]

you dont have photos you can share do you, may be the way to go. Appreciate it. Thanks

[Stazi]

Use this to make the transition


https://www.motionraceworks.com/products/3-to-3-5-stainless-steel-304-transition-formed-1?utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=Cj0KCQjwwr32BRD4ARIsAAJNf_1R_4nJcmk7SV1Bg0A8 _JYHbmq_IFbb8QzjtTJEHSt8LI3yQZN9hn0aAhXHEALw_wcB


Sent from my iPhone using Tapatalk

[Stazi]

you dont have photos you can share do you, may be the way to go. Appreciate it. Thanks

Photo is in the link I posted.


Sent from my iPad using Tapatalk

[james yarosz]

If you have ever worked with fiberglass they can be repaired.

[Mikey]

If you have ever worked with fiberglass they can be repaired.

I initially fixed a splitting muffler at the seams, via fibreglass etc, but finally replaced. Bought at ski dim. Problem was that number and model I got from them was wrong. Apparently a batch or two were given different mufflers than what specs said.

After receiving my muffler, now mufflers I had to deal with what you said, wrong size outlets, and being far away and needing the part at that moment my solution was going to a muffler shop and getting a short piece of stainless 3” pipe then stretching the other end out to 3 1/2” to an exact fit then using fern o plumbing fittings to mate them all together. Works great..

Sadly boat not available at the moment to get pics to show what I did.

[pipnj25]

Thanks so much, yeah i am def in the same boat. I have fibreglassed for now but long term was thinking i need to replace both mufflers and hoses eventually and how do i get around that. I think your solution maybe the way to go. Thanks so much.